•
Assemble the base frame with aluminium corners (1).
•
Attach headboard fittings if the bed has a headboard (2).
•
Position the stabilisers inside the base frame as shown (3).
•
The number of stabilisers varies depending on the width of the bed (4).
•
Position the base boards on the base frame and connect them with the four black "legs"
(5).
•
With headboard: fit the headboard by lowering the openings at the underneath of the
headboard to slide on to both fittings (6).
AKVA BOX
Page 2
Need help?
Do you have a question about the AKVA BOX and is the answer not in the manual?