Akva Big Box single Manual

Advertisement

If the bed has drawers on one side only or is designed for a bed with a width of 90,
100 or 120 cm.
The long side piece is fitted with bench screws and wood dowels.
The cross pieces are fastened to the side piece with bench screws.
The two steel beares are screwed into the basic construction.

Big Box, single

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Big Box single and is the answer not in the manual?

Questions and answers

Summary of Contents for Akva Big Box single

  • Page 1 Big Box, single If the bed has drawers on one side only or is designed for a bed with a width of 90, 100 or 120 cm. • The long side piece is fitted with bench screws and wood dowels. •...
  • Page 2 • The headboard fittings are fitted to the extension pieces (right and left respectively.) • The extension pieces are fitted to the side and headend pieces. • Fit the deck plate...
  • Page 3 Big BOX drawers • Fasten the castors to the bottom of the drawers with screws using the pre-drilled holes. • Assemble the drawers by attaching the drawer backs with the sides using 2 wood dowels. (2) • Push the bottom of the drawers into the milling. •...

Table of Contents