Akva BOX Manual

Hide thumbs

Table of Contents

Quick Links

Assembly instructions for Akva bases/headboards:

Akva Box ................................................................................................

Akva 2 Box .............................................................................................

Akva 2 Box on castors ............................................................................

Akva 4 Box ...........................................................................................

Akva 4 Box on castors ............................................................................

Akva 8 Box .. ..........................................................................................

Akva storage base, single .........................................................................

Akva storage base ...................................................................................

Akva Sound ............................................................................................

Akva Benti .............................................................................................

Assembly instructions for Akva waterbeds:

Akva Soft/Akva Junior .............................................................................

Inside Akva ............................................................................................

Akva Allround .........................................................................................

Akva Deco ..............................................................................................

Akva Vega ..............................................................................................

Akva Mira without headboard ....................................................................

Akva Mira with headboard .........................................................................

Akva BoxBed ..........................................................................................

Hardside ................................................................................................

Akva Wellness .........................................................................................

Spare parts:

Akva Vital Electronic heating element .........................................................

Mattress .................................................................................................

Massage .................................................................................................

Other information:

Cover and comfort top ............................................................................

Cover for foam divider and sheets .............................................................

Care / maintenance / tips ........................................................................

Care and maintenance form .....................................................................

Warranty conditions ................................................................................

Version: 03.2012

Contents

Table of Contents

Need help?

Do you have a question about the AKVA BOX and is the answer not in the manual?

Questions and answers

Summary of Contents for Akva AKVA BOX

Page 1: Table Of Contents
Contents Assembly instructions for Akva bases/headboards: Akva Box ....................Akva 2 Box ..................... Akva 2 Box on castors ................Akva 4 Box ................... Akva 4 Box on castors ................Akva 8 Box .................... Akva storage base, single ................. Akva storage base ...................
Page 3 – sleeping and resting comfortably too. Akva Waterbeds was founded in 1981 in the little Danish town of Ry, and all parts of your new bed are now manufactured in our own facilities for optimal matching. Our focus on insourcing ensures you that an Akva waterbed meets the highest quality standards.
Page 5: Akva Box
AKVA BOX • Assemble the base frame with aluminium corners (1). • Attach headboard fittings if the bed has a headboard (2). • Position the stabilisers inside the base frame as shown (3). • The number of stabilisers varies depending on the width of the bed (4).
Page 6: Akva 2 Box
(7). Please note that the height can only be adjusted when the screw is loosened (8). • Position the stabilisers as shown in the drawing. With headboard (9). Without headboard (10 ). • For fitting of the base boards: see the instructions for the Akva box base Page 3...
Page 7 Page 4...
Page 8 Page 5...
Page 9: Akva 2 Box On Castors
Position the stabilisers as shown in the drawing. With headboard ( 5 ). Without headboard ( 6 ). • For fitting base boards: see the instructions for the Akva box base • Fit the drawer by mounting the back piece of the drawer on the sides ( 7 ). The bottom of drawers is pushed into the milled grooves in the drawer sides ( 8 ) Please note the pilot holes for the castors must be placed downwards.
Page 10 Page 7...
Page 11 Page 8...
Page 12: Akva 4 Box
Position the stabilisers as shown in the drawing. With headboard (9). Without headboard (10). • For fitting base boards: see the instructions for the Akva box base NB! If the drawer base has drawers on only one side or is 90, 100 or 120 cm wide: see instructions for Akva 2 box...
Page 13 Page 10...
Page 14 Page 11...
Page 15: Akva 4 Box On Castors
Position the stabilisers as shown in the drawing. With headboard ( 6 ). Without headboard ( 7 ). • For fitting the base boards, see the instructions for the Akva box base. • Fit the drawers by mounting the back piece of the drawer on the sides ( 8 ).
Page 16 Page 13...
Page 17: Akva 8 Box
(7). Please note that the height can only be adjusted when the screw is loosened (8). • Position the stabilisers as shown in the drawing. With headboard (9). Without headboard (10). • For fitting base boards: see the instructions for the Akva box base. Page 14...
Page 18 Page 15...
Page 19 Page 16...
Page 20: Akva Storage Base, Single
The front is placed by tilting it into the groove and then lifting it up (10). • Place the stabilisers as shown in the drawing. With headboard (8). Without headboard (9). • For fitting the base boards: see the instructions for the Akva box base. Page 17...
Page 21 Page 18...
Page 22 Page 19...
Page 23 Page 20...
Page 24: Akva Storage Base
(10). • For fitting the base boards: see the instructions for the Akva box base NB! If the base has storage space on only one side or is designed for a bed with a width of 90, 100 or 120 cm: see instructions for Akva storage base, single...
Page 25 Page 22...
Page 26 Page 23...
Page 27: Akva Sound
(2). • Position the stabilisers inside the base as shown in the instruction for Akva box. • Provide the surfaces of the stabilisers and base frames with rubber tape. It will help fastening the base boards (3).
Page 28: Akva Benti
AKVA BENTI • Fit the 4 corners of the frame (the strongest side board being at the bottom) and disperse the remaining bearers. Insert the screws through the two bearers and attach them loosely to the legs using two washers. Place the larger washer between the two bearers and the smaller washer between the lowermost bearer and the leg (1).
Page 29: Akva Soft/Akva Junior
Fit base frame (1) and (2). See instructions for Akva bases. • Fit the bottom of the cover so that the Akva logo is located at the foot end (3). Remove the top, place the fixing paddles in the holes at the bottom of the cover, secure them by placing them in the holes of the base board.
Page 30: Inside Akva
Assemble the corners of the foam frame with fastening tape. • Fit the bottom of the cover so that the AKVA logo is placed at the foot end (4). Remove the top, place the fixing paddles in the holes at the bottom of the cover and secure them by inserting them in the holes in the base board.
Page 31: Akva Allround
(2.2). Fasten the screws on the underside of the base boards • Fit the bottom of the cover so that the AKVA logo is located at the foot end (3). Remove the top, place the fixing paddles in the holes at the bottom of the cover and secure them by inserting them in the holes in the base board.
Page 32: Akva Deco
Secure the cover with fastening tape one side at a time. • Fit the bottom of the cover so that the Akva logo is located at the foot end (5). Remove the top, insert the fixing paddles in the holes in the bottom of the cover and secure them by inserting the paddles in the holes in the base board.
Page 33: Akva Vega
Secure the frame to the base plate with angle brackets. • Fit the bottom of the cover so that the Akva logo is placed at the foot end (7). Remove the top, place the fixing paddles in the holes at the bottom of the cover; secure the cover by placing the paddles in the holes of the bottom plate.
Page 34 Page 31...
Page 35: Akva Mira Without Headboard
AKVA MIRA WITHOUT HEADBOARD • Assemble the base, position stabilisers and base boards. See instructions for Akva Box. • Fit the Mira frame by fastening the angle brackets loosely on the upholstered side pieces. Loosely fit the upholstered foot and head end pieces to the side pieces. Hardware bag no.
Page 36: Akva Mira With Headboard
AKVA MIRA WITH HEADBOARD • Assemble the base, position stabilisers and base boards. See instructions for Akva Box. • Fit the Mira frame by fastening the angle brackets loosely on the upholstered side pieces. Loosely fit the upholstered foot piece to the side pieces. Hardware bag no. 3 is to be used above the base boards, bag no.
Page 37: Akva Boxbed
With headboard: fit headboard fittings in the head end of the base sides (2). Fit the solid wooden legs in the base side (3). Please note: screw from the inside. (4). • Position the stabilisers inside the base frame as shown in the instructions for AKVA BOX (item 3 and 4) •...
Page 38 Page 35...
Page 39: Hardside
• Place the heating element(s) (2). Feed out the tube through the cover bottom and the base plate. See the instructions for Akva Vital Electronic heating elements before assembling them. •...
Page 40: Akva Wellness
Place the foam frame on top of the bottom plate (4). • Pull out the cables from the heating element and massage units as shown in the drawing (4). See the instructions for Akva Vital Electronic heating element before assembling it. • Mount the safety liner (5).
Page 41: Akva Vital Electronic Heating Element
AKVA VITAL ELECTRONIC, max. 250-260 W / 230 - 240 V~ Read these instructions carefully before assembling and using the heating system. • Position the heating element (1) flat on the bottom of the bed. • Ensure that no sharp edges damage the heating element.
Page 42 Install the control box with the temperature setting away from the water mattress, e.g. on the base of the water bed, since the box is not watertight. • The Akva Vital heating system must only be used as a unity. Operating procedure •...
Page 43 Indicator light Green Yellow Standard 24 Temperature OK Heating hour operation 12 hour Heating Day: temperature OK operation Night: heating element switched off Error condition Fault of cable – Fault of Fault of heating (rhythmic check that the regulator element – possibly flashing of 1 connection plug overheating, wait until...
Page 44: Mattress
MATTRESS Akva mattresses contain vinyl with phthalate-free softener to guarantee long durability and good environmental properties. Read these user instructions thoroughly before assembly. Filling with water Before filling the mattress with water it must be of room temperature. How to fill a single mattress with water: •...
Page 45 10-20% after draining. Drain the mattress using a pump from your local Akva-dealer and dry off any external moisture. Roll up the mattress carefully from the head end and be careful not to push and displace the stabilisation layers inside the mattress.
Page 46: Massage
• The cable of the heating element is led through the hole in the massage unit (2). See the instructions for Akva Vital Electronic heating element before assembling it. • Lead the cables of both heating element and the massage unit underneath the massage unit, the foam and through the hole in the bottom part of the cover.
Page 47: Other Information: Cover And Comfort Top
COVER Washing The top of the cover must be regularly aired, washed and cleaned. Please follow the washing instructions sewn on to the cover. Do not fill the washing machine so that the drum cannot turn. Daily airing of the bedroom and regular washing/cleaning are essential if marks and discolorations that might otherwise be caused by perspiration are to be avoided.
Page 48: Cover For Foam Divider And Sheets
TOPLINER The topliner is attached to the lower part with the zipper, and afterwards the upper part of the cover can be zipped on. COVER FOR FOAM DIVIDERS Hygienic cover which can easily be wiped dry (not water-proof.) • Bend the divider slightly on the middle and place the ends of the divider in the cover ( 1 ).
Page 49: Care / Maintenance / Tips
Removes impurities from the surface of the water mattress. We recommend that the mattress is cleaned four times a year. Akva Guard Apply to the surface of the water mattress after using Vinyl Wash. Akva Guard provides the mattress with a lasting smoothness. Akva Quiet Removes air bubbles from the water mattress and thereby reduces splashing noise.
Page 50 If air is suddenly formed in the water mattress, it should be extracted and Akva Quiet added. If the problem occurs repeatedly, follow the procedure below as if odour was being emitted from the water mattress.
Page 51 CARE AND SERVICE FORM Assemble date: Signature: Conditioner - Long Life Service Date Signature/stamp Date Signature/stamp Notes: Page 49...
Page 52: Care And Maintenance Form
Akva Vital Electronic heating element provided the waterbed consists of original Akva parts and was bought at an authorised dealer. The guarantee is valid for new items (Production date + max. 3 months) from the date of delivery.

This manual is also suitable for:

Akva 2 box Akva 4 box Akva 8 box Akva storage base Akva storage single Akva sound ... Show all

Akva BOX Manual

Quick Links

Need help?

Questions and answers

Related Manuals for Akva AKVA BOX

Summary of Contents for Akva AKVA BOX

This manual is also suitable for:

Table of Contents