Table of Contents
Advertisement
Quick Links
AKVA Nordic/Modulex with headboard
•
Assemble the base. (See also assembly instructions for Akva bases.)
•
The bottom plates are placed on the base and joined with the 4 legged plates. The side of
the bottom plates that should be turning up is the one with the threaded bushings – like
shown on these pictures.
•
Upholstered frame: the frame parts of the bed are assembled with angle brackets. They
are only to be tightened loosely at this point.
•
The frame parts are positioned on the bottom plates, but the screws are not to be tightened
firmly at this point.
Advertisement
Table of Contents
Related Manuals for Akva Nordic with headboard
Summary of Contents for Akva Nordic with headboard
- Page 1 AKVA Nordic/Modulex with headboard • Assemble the base. (See also assembly instructions for Akva bases.) • The bottom plates are placed on the base and joined with the 4 legged plates. The side of the bottom plates that should be turning up is the one with the threaded bushings – like shown on these pictures.
- Page 2 • The angle brackets are tightened loosely at the corners. Then one by one the screws at each corner are tightened firmly. It is important to begin with the inner screws. After this the angle brackets are all to be tightend firmly. •...
- Page 3 The headboard is fitted with one angle bracket at each corner and two secured to the base. • The lower part of the cover is positioned with the AKVA logo at the foot end. The top cover is zipped off and put aside. The fixing paddles are put through the holes in the lower part of the cover and fixed to the bottom plates.
- Page 4 • After filling the mattress, removing the surplus of air and adding one or two bottles of Long Life the top cover is zipped on the lower part of the cover. (See instructions for covers.)
Need help?
Do you have a question about the Nordic with headboard and is the answer not in the manual?
Questions and answers