Advertisement
AKVA HYBRID HIGH Q / HYBRID HIGH
Assemble the headboard and the base. Position the stabilisers inside the base frame.
See instructions for Akva bases.
Position the base boards on the base frame. Assemble the base boards with the four
black "legs".
Fit the legs of the head end to the upholstered side pieces. Position the side pieces on
the base boards and push them towards the headboard. If necessary readjust the
height.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Akva HYBRID HIGH Q
Summary of Contents for Akva HYBRID HIGH Q
- Page 1 AKVA HYBRID HIGH Q / HYBRID HIGH Assemble the headboard and the base. Position the stabilisers inside the base frame. See instructions for Akva bases. Position the base boards on the base frame. Assemble the base boards with the four black “legs”.
- Page 2 Finally, also the stabilisation angels at the head end. Place the lower part of the cover in a way that the AKVA Logo is located at the foot end, right side. Remove the top, place the fixing paddles in the holes made in the bottom of the cover and secure them by positioning them in the small base board holes.
- Page 3 Place the heating element(s). Feed out the tube through the hole in the bottom of the cover and base board. See the instructions for Akva Vital Electronic heating elements before assembling them. Fit the Zipliner safety liner. Avoid folds directly over the heating element(s) and smooth out the bottom as much as possible.
Need help?
Do you have a question about the HYBRID HIGH Q and is the answer not in the manual?
Questions and answers