Advertisement
Inventory
Description (Figure 4)
A. Roller Table Assembly
— Model T28172 39" .................................. 1
— Model T28369 78" ................................. 1
— Model T28370 118" ................................ 1
B. Adjustable Leg Assemblies
— Model T28172, T28369 .......................... 2
— Model T28370 ........................................ 3
C. Hex Nuts M8-1.25 (T28172, T28369) ......... 8
Hex Nuts M8-1.25 (T28370) ..................... 12
D. Flat Washers 8mm (T28172, T28369) ........ 8
Flat Washers 8mm (T28370) .................... 12
E. Hex Bolts M8-1.25 x 16 (T28172, T28369) . 8
Hex Bolts M8-1.25 x 16 (T28370) ............. 12
F.
Hex Wrench 6mm ....................................... 1
B
C
D
Figure 4. Model T28172, T28369, T28370
inventory.
Assembly
It is easiest to assemble the roller table upside-
down, then have another person to help you turn
it upright when complete. If you are securing the
table to the machine, you will need to have the
optional T28378 Mounting Plate available at the
time of assembly.
Items Needed
Open-End Wrenches or Sockets 14mm ............ 2
Cardboard or Blanket ........................................ 1
Additional Person .............................................. 1
T28378 Mounting Plate (Optional) ..................... 1
-2-
Qty
A
E
F
Qty
To assemble roller table:
1.
With help from an assistant, place roller table
assembly upside-down on cardboard or blan-
ket with wider lip of side rails facing up.
2.
Secure each leg assembly to roller table
assembly with (4) M8-1.25 x 16 hex bolts, (4)
M8-1.25 hex nuts, and (4) 8mm flat washers
per leg (see Figure 5).
Note: If using T28378 Mounting Plate, install
on machine-mounting side of table before
securing leg assembly during Step 2.
x 8
Figure 5. Roller table assembly (T28369 shown).
The dynamic forces involved with process-
ing large/heavy workpieces may cause
unsecured roller tables to shift during cut-
ting operations, which could result in kick-
back injuries, depending on the type of
machine being used. To reduce this risk,
properly secure roller tables to both infeed
and outfeed side of your machine.
T28172/369/370 Roller Tables (Mfd. 10/17)
Advertisement
