Grizzly T33446 Instructions

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Introduction
Adjust the height of the Model T33446 Outfeed
Table to the same height as the table of your
machine to provide outfeed support for bandsaws,
shapers, or table saws that have a compatible
floor-to-table height.
Specifications
Table Size (Length x Width) ..............36" x 21
Table Height ........................................ 33
Maximum Weight Capacity......................132 lbs.
Needed for Setup
Description
• Safety Glasses (for each person) ............... 1
• Hex Wrench 6mm ....................................... 1
• Open-End Wrenches
• Another Person .......................................... 1
• Level ........................................................... 1
• Measuring Tape .......................................... 1
• Phillips Head Screwdriver #2 ..................... 1
To reduce your risk of
serious injury, read this
entire
using machine.
Wear safety glasses during
the entire setup process!
COPYRIGHT © OCTOBER, 2022 BY GRIZZLY INDUSTRIAL, INC., REVISED NOVEMBER, 2022 (CS)
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
⁄
1
⁄ ", ⁄ " ..............1 Ea.
3 13
4 16
manual BEFORE
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
(FOR MODELS MFD. SINCE 11/22) #CS22506 PRINTED IN TAIWAN
***Keep for Future Reference***
OUTFEED TABLE
Inventory
Description (Figure 1)
A. Table ........................................................... 1
B. Right Leg .................................................... 1
C. Locking Swivel Casters .............................. 2
D. Swivel Casters ............................................ 2
E. Left Leg ...................................................... 1
F.
Base ........................................................... 1
G. Fasteners (Not Shown)
⁄ "
5
16
— Hex Nuts
"–45"
2
— Cap Screws M8-1.25 x 16 ..................... 12
— Lock Washers 8mm .............................. 12
— Fender Washers 8mm ............................ 6
— Height Lock Handles .............................. 2
Qty
MODEL T33446
INSTRUCTIONS
⁄ "-12 ....................................... 4
1
2
A
D
E
F
Figure 1. Inventory.
Qty
B
C
V2.11.22