Grizzly T27949 Instructions

Grizzly T27949 Instructions

2-door closet cabinet

Advertisement

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com

Introduction

The Model T27949 2-Door Closet Cabinet requires
some assembly. Follow the instructions below for
assembly, operation, and maintenance.
Figure 1. Model T27949.
• To reduce risk of crushing injuries from
tool cabinet tipping over on you:
— Do not stand on cabinet.
— Only move or transport cabinet with all
doors closed and locked.
— Push cabinet only (do not pull it) when
moving.
• Do not exceed weight capacities:
— Max individual shelf weight limit
is 325 lbs.
— Max total tool cabinet weight limit
(including contents) is 1300 lbs.
• To prevent accidental tipping, ensure
adjustable feet are down and cabinet
body is level.
• Do not allow children to have unsupervised
access to cabinet.
COPYRIGHT © MARCH, 2017 BY GRIZZLY INDUSTRIAL, INC., REVISED JULY, 2017 (MN)
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
(FOR MODELS MFD. SINCE 10.16) #JH18540 PRINTED IN CHINA
MODEL T27949
2-DOOR CLOSET
CABINET
INSTRUCTIONS
Inventory
2-Door Closet Cabinet with Shelves ............ 1
Cabinet Feet ................................................ 4
Keys ............................................................. 2

Assembly

The Model T27949 comes with four adjustable
feet for leveling the cabinet.
To install feet:
1.
With help from another person, lay cabinet
upside down on floor (see Figure 2).
Note: We recommend sweeping the floor
clean and laying down a piece of cardboard
or a blanket to prevent scratching the finish
during this step.
2.
Install one adjustable foot in each corner (see
Figure 2).
Figure 2. Location of adjustable feet.
3.
To prevent tipping or rocking, level the cabi-
net body by rotating the cabinet feet up or
down as needed.
Qty
Adjustable Feet
V1.07.17

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the T27949 and is the answer not in the manual?

Questions and answers

Summary of Contents for Grizzly T27949

  • Page 1 MODEL T27949 2-DOOR CLOSET CABINET INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction Inventory The Model T27949 2-Door Closet Cabinet requires • 2-Door Closet Cabinet with Shelves .... 1 some assembly. Follow the instructions below for •...
  • Page 2 Use a soft, clean cloth and soapy water (use regular dish soap) to remove grease, dirt, or In/Out oil. Do not use solvents or flammable clean- Adjustment ing liquids. • Use graphite to lubricate lock annually. Figure 4. Hinge adjustments. T27949 Tool Cabinet (Mfd. 10/16)
  • Page 3 Please Note: We do our best to stock replacement parts whenever possible, but we cannot guarantee that all parts shown here are available for purchase. Call (800) 523-4777 or visit our online parts store at www.grizzly.com to check for availability.

Table of Contents