Function Of Fs-Monitor; Printer Information; Status Message - Ricoh D1 Operating Instructions Manual

Function of FS-Monitor

Printer Information

The printer status is displayed.

Status Message

The status of the connected printer is displayed.
Status
Ready
Master Making
Printing
Offl ine
Power Off
Communication Error
Cover Open
Exchange Ink
Roll-Master End
Exchange Eject-Roll
Paper Empty
Paper Jam
Error
REFERENCE
• The displayed status may vary depending on the printer model.
• It may take time to display the status.
36
Message
Ready.
Master Making.
Printing.
Offl ine
The power of Digital Duplicator is not ON. Turn on the power of
Digital Duplicator.
Cannot communicate. Check the connection of cables etc.
A Cover is open. Close the cover.
There is no ink. Replace the old ink pack with a new one.
There is no master. Replace the master roll with a new one.
Change master ejection core.
There is no paper. Load the printing paper.
Paper jam. Remove the jammed paper.
An error has occurred. Check the Digital Duplicator.