Web Browser Setup Items; General; Tcp/Ip - Ricoh D1 Operating Instructions Manual

Web Browser Setup Items

General

Item
Web browser
Change root
Password
LAN Interface

TCP/IP

Item
Web browser
TCP/IP Protocol
DHCP/BOOTP
RARP
IP Address
Subnet Mask
Default
Gateway
80
Details
Sets the password in ASCII strings (within 7
characters). This is used as Authentication
password for AdminManager and Web.
Sets the physical network type. Use in AUTO
normally. If LINK lamp on the hub does not light,
change the setting to the network type of the
connected hub.
Details
Enables TCP/IP protocol.
Enables DHCP/BOOTP protocol. Toggle between
DHCP and BOOTP automatically and obtains an
IP address.
Enables RARP protocol.
Sets the IP address in the form "xxx.xxx.xxx.xxx"
(decimal).
Sets the Subnet Mask in the form "xxx.xxx.xxx.
xxx" (decimal). "0.0.0.0" is canceled, and the
Subnet Mask complying with the IP address is
automatically used.
Sets the Default Gateway in the form "xxx.xxx.
xxx.xxx" (decimal). "0.0.0.0" is canceled
Default
None
AUTO
Default
ENABLE
ENABLE
ENABLE
0.0.0.0
0.0.0.0
0.0.0.0