Additional Information; Warranty Information - D-Link DXS-1210-16TC Getting Started Manual

DNA (D-Link Network Assistant)
The DNA (D-Link Network Assistant) included on the
installation CD is a program for discovering Switches
with the same L2 network segment connected to your
PC. This tool can support windows 2000, XP, Vista, and
Windows 7. There are two options for the installation
of DNA (D-Link Network Assistant), one is through the
autorun program on the installation CD and the other is
manual installation.
Option 1: Follow these steps to install the DNA
(D-Link Network Assistant) via the autorun
program on the installation CD.
1. Insert the CD into your CD-Rom Drive.
2. The autorun program will pop up automatically
3. Simply click on the "Install DNA (D-Link Network
Assistant)" button and an installation wizard will guide
you through the process.
4. After successfully installing the DNA, you can find it
under Start > Programs > D-Link > DNA.
5. Just connect the Switch to the same L2 network
segment of your PC and use the DNA (D-Link
Network Assistant) to discover the Switches.
Option 2: Follow these steps to install the DNA
(D-Link Network Assistant) manually.
1. Insert the Utility CD into your CD-Rom Drive.
2. From the Start menu on the Windows desktop, choose
Computer.
3. Double click on your CD-Rom/DVD-Rom Drive to start
the autorun menu, or right click on the Drive to open
the folder. Select DNA (D-Link Network Assistant) and
double click on the setup.exe file.
4. Follow the on-screen instructions to install the utility.
5. Upon completion, go to Start > Programs > D-Link >
DNA and open the DNA (D-Link Network Assistant).
6. Just connect the Switch to the same L2 network
segment of your PC and use the DNA (D-Link
Network Assistant) to discover the Switch.
For detailed information of DNA, please refer the user
manual.
Telnet Management
(depending on the purchased model)
Users may also access the switch through Telnet using
your PC's Command Prompt. To access it from your
computer, users must first ensure that a valid connection
is made through the Ethernet port of the Switch and your
PC, and then click Start > Programs > Accessories >
Command Prompt on your computer. Once the console
window opens, enter the command telnet 10.90.90.90
(depending on configured IP address) and press Enter
on your keyboard. You should be directed to the opening
console screen for the Command Line Interface of the
switch, enter the "admin" for the default user name and
password for the Switch and press the Enter key.
SNMP-Based Management
(depending on the purchased model)
You can manage the Switch with D-Link D-View or any
SNMP-compatible program. The SNMP function is
default Disabled.

Additional Information

If you are encountering problems setting up your
network, please refer to the user manual that came
with the switch. It contains many more rules, charts,
explanations, and examples to help you get your network
up and running.
Additional help is available through our offices listed at
the back of the user manual or online. To find out more
about D-Link products or marketing information, please
visit the website http://www.dlink.com.

Warranty Information

The D-Link Limited Lifetime Warranty information
is available at http://warranty.dlink.com/
5