Table of Contents
Advertisement
LED Indicators
D D GS-1016D
The LED indicators allow you to monitor, diagnose,
and troubleshoot potential problems with the switch,
connection, or attached devices.
LED
Color
State
Light on
Power
Green
Light off
On
Green
Blinking
Link/Act/
Speed
On
Amber
Blinking
Cable Diagnostics (During Boot Only)
Port Link/Act/
Speed LED Color
No Faults Detected /Good Cable
Green
Amber
Open or Short Circuit
DIP Switches
D D GS-1016D
The DIP switches on the front panel allow easy
configuration of the advanced features of the DGS-
Indication
1016D.
Power on
Switch
Power off
Connection (or link) at
1000 Mbps
Flow
Control
Reception or
Transmission at 1000
Mbps
Isolation
Connection (or link) at
10/100 Mbps
Storm
Control
Reception or
Transmission at 10/100
Port Isolation:
Mbps
When enabled, ports 1 to 15 will be isolated
from each other, but will still be able to
communicate with port 16. Port 16 will be able to
communicate with all the ports available on this switch.
Status
Note: The switch must be power cycled
after changing DIP Switch settings for new
Connection
settings to take effect
Additional Information
Additional help and product information is available
online at http://www.dlink.com.
Warranty Information
Please visit http://warranty.dlink.com/ for warranty
information for your region.
©2020 D-Link Corporation. All rights reserved.
Trademarks or registered trademarks are the property
of their respective holders. Software and specifications
subject to change without notice.
DIP
Function Controlled
Enables/Disable IEEE 802.az
EEE
Energy-Efficient Ethernet Feature
Enables/Disable Flow Control
Feature
Port Isolation: See Below
Port
Storm Control: When enabled, a
broadcast storm control threshold
and
value of 128 kbps will be applied
to incoming broadcast packets on
all ports.
.
Default
On
On
Off
5 5
Advertisement
Table of Contents
