VTech v 2656 User Manual page 7

Connecting Power to Base Unit
Plug the AC power adapter into an electrical outlet, and the DC connector into the
jack on the bottom of the Base Unit.
CAUTION: Use only the VTech power supply provided with your VTech Unit.
IMPORTANT:
FOR MAXIMUM PERFORMANCE OF YOUR
CORDLESS TELEPHONE SYSTEM:
1. Choose a central location for your Base Unit.
2. Install your Base Unit and Extension Handsets
away from electronic equipment, such as
personal computers, television sets and
microwave ovens.
3. In locations where there are multiple cordless
telephones, separate base units as much as
possible.
4. Install your telephone equipment away from
heat sources and sunlight.
5. Avoid excessive moisture, dust or extreme cold.
91-005358-050-000 v2656.pmd
7
7
Setup
8/5/2004, 4:50 PM