Answering Operation; Answering System Operation; Audible Indicators; Turn Answering System On Or Off - VTech v 2656 User Manual

The message window shows the total number of messages in all mailboxes.
When the system is turned on, you will hear "Answering machine on" and the
ON/OFF light will be lit.
When the system is off, you will hear "Answering machine off" and the ON/OFF
light will not be lit. The system will still answer after 10 rings if it is off, then announce
"Please enter your security code" and wait for you to enter your two-digit code to
access remote functions. (See Remote Access on page 34 for details.)

Set the Clock

This system comes preset to Monday, 12:00 AM, and CL will flash in the
message window. You will need to set the correct day and time at the Base.
4 Press CHANGE to advance the minutes one at a time
- OR -
Press and hold CHANGE to advance the minutes in increments of 10. When the
system announces the correct minute, press TIME/SET. The system announces the
current clock setting.
NOTE: Press a MAILBOX/STOP button to exit programming at any time.
91-005358-050-000 v2656.pmd

Answering System Operation

Audible Indicators

This system gives you voice prompts for
feature operations and voice confirmations
when you press a button or complete an
operation.

Turn Answering System On or Off

When you supply power to the Base Unit,
the Answering System will be turned ON.
Press ON/OFF to turn the system on or off.
1 Press TIME/SET. The time and day will
be announced, followed by "To set day
and time, press TIME/SET." Press TIME/
SET again. The day will be announced.
2 Press CHANGE until the system
announces the correct day, then press
TIME/SET. The system announces the
current hour setting.
3 Press CHANGE until the system
announces the correct hour, press
TIME/SET. The system announces
the current minute setting.
26
26 8/5/2004, 4:51 PM