Disconnecting And Connecting The Headgear; Using The Optional Headgear Clips - PHILIPS Respironics EasyLife Instructions For Use Manual

Disconnecting and Connecting the Headgear

Thread the headgear strap through the slot in the
faceplate (Figure 2). The sticky side will be on the
outside while you thread the strap. Fold the strap
back and attach the tab to the headgear strap.
Using the Optional Headgear Clips (Figure 3)
1. Remove the headgear straps from the
bottom of the faceplate.
2. Attach the clips to the faceplate, by placing
the hook of the clips in the slot of the
faceplate and pull inwards toward the face.
3. Thread the bottom headgear straps
through the clip slots. Fold the straps
back and attach the tabs to the headgear
straps.
4. To remove the clips from the faceplate,
push the clips outward away from the face.
Figure 2
Figure 3
INSTRUCTIONS FOR USE
9