Handsfree Speakerphone Operation; Base Speakerphone Operation; Line In Use Indication; Low Battery Indication - VTech QW2432 Owner's Manual

Handsfree Speakerphone Operation

Your QW2432 handset has a built-in handsfree speakerphone. This feature
allows you to stand the Handset upright on a table or desktop and have handsfree
conversations. For more information, refer to MAKING CALLS in HANDSET
AND BASE OPERATION.

Base Speakerphone Operation

The Base of your QW2432 is equipped with a full duplex speakerphone. This
is a very useful feature for handsfree conversations or conference calls at the
base unit. For more information, refer to MAKING CALLS in HANDSET AND
BASE OPERATION.

Line in Use Indication

On the Handset :
When the telephone line is currently
being used by a system Handset or
the QW2432 Base, a status message
similar to this will display on idle
Handset(s):
When the telephone line is currently
being used by a parallel set (a
telephone device other than the
QW2432 on the same line); the phone
icon will remain on steadily, and
EXTENSION IN USE will be displayed.
On the Base :
When a system Handset or a
QW2432 Base is currently being used,
the LINE IN USE LED on the base will
illuminate steadily. When a parallel set is currently being used, the LINE IN USE
LED on the base will flash.

Low Battery Indication

When a low battery is detected, the Battery icon will flash and a warning beep
is played. The status message LOW BATTERY will also be displayed when
the Handset is in idle mode. To prevent an unexpected call drop, a drained
Handset battery should be replaced by a fully charged spare battery.
Handset and Base Operation
28