Install The Battery - HP Photosmart R717 Quick Start Manual

T2QSG.fm Page 4 Tuesday, January 11, 2005 5:50 PM
2.

Install the Battery

Your camera can use either a rechargeable HP Photosmart
R07 Lithium Ion battery (L1812A/L1812B) or a disposable
Duracell® CP1 battery. See Appendix A in your camera
User’'s Manual for important information about the
rechargeable Lithium Ion battery.
1. Open the Battery/Memory card door on the bottom of
the camera by sliding the door to the back of the camera.
2. Insert the battery in the larger slot as shown, and push it
in until the latch catches.
3. Close the Battery/Memory card door by pushing the
door down and then sliding the door toward the front of
the camera until the door latches.
4 HP Photosmart R717 Quick Start Guide