Setting Up Your Camera; Install The Battery; Charge The Battery - HP Photosmart R837 Quick Start Manual

2
Setting up your
camera

Install the battery

1. Open the Battery/Memory Card door
by sliding the door latch as indicated
on the Battery/Memory Card door.
2. Insert the battery in the larger slot,
pushing the battery in until the latch
catches.
3. Close the Battery/Memory Card
door.
Note Fully charge the battery before using it the first
time. Turn the camera off before removing the battery.
To remove the battery, press the battery latch as shown
until the battery springs free.

Charge the battery

You can charge the battery in the camera, using the USB
cable and power adapter.
Note Your camera uses a rechargeable
HP Photosmart R07 Lithium Ion battery (L1812A/
L1812B). Do not charge any other battery in the camera,
optional dock, or optional quick recharger.

Setting up your camera

9