Vemer CHRONOS Series User Manual page 66

environment temperature).
(activation time + deactivation time of heating) and it can have values of 10, 20 or
30 minutes.
During the operating, at the beginning of the regulation period, the instrument
setpoint; on the basis of this difference the activation time is calculated (and
consequently the deactivation time). The more the measured temperature is next to the
Once regulation period is passed, the instrument compares again the environment
The result of the proportional regulation is subordinated to the correct selection of the
parameters.
To modify the regulation type, hysteresis values (on/off regulation), band and To modify the regulation type, hysteresis values (on/off regulation), band and
period (proportional regulation) see "Regulation parameters" at page 19). period (proportional regulation) see "Regulation parameters" at page 19).
- 28 -
CHRONOS Programmable Thermostat User Manual