Vemer CHRONOS Series User Manual page 51

to Friday and P2 on Saturday and on Sunday (the programs profile is described at the
end of this manual on page 34-35).
If this programming doesn't satisfy the user needs it' s possible to change it.
To modify the programming:
1. From the normal operation display, press for a long time the key
symbol starts flashing on field
2. Press for a short time the key
to access the parameters modification.
3. The programs page is displayed:
the current program (for example P1) of the
current operating mode (
corresponding profile of the program.
3.1. If the set program is good, move to the
3.2. If the set program is not good, press
the key .
The set program flashes: choose a
different program among the 7 available
programs pressing the keys
3.2.1. If no program exactly satisfies the
user's needs, choose any program
press the key
modification of the program profile.
On field
on field
level (T1, T2 o T3) set for that
specific time (00:00).
until the symbol
o ) and the
and .
and
to access the
00:00
flashes the temperature
- 13 -
CHRONOS Programmable Thermostat User Manual
flashes and press the key
.
until the