Rear Suspension; Stopper Band - Yamaha PHAZER PZ50X Supplementary Service Manual

AIR PRESSURE ADJUSTMENT (PZ50RT)/

REAR SUSPENSION

6. Remove the hose connector from the air valve.
NOTE:
When removing the connector, the sound of air
escaping may be heard, but this is from the pump
hose, not the shock absorber.
Air pressure range:
345 kPa (3.4 kgf/cm², 50 psi) to 1,034 kPa
(10.3 kgf/cm², 150 psi)
Recommended air pressure:
483 kPa (4.8 kgf/cm², 70 psi)
CAUTION:
Do not exceed 1,034 kPa (10.3 kgf/cm², 150 psi).
7. Install the air valve cap.
NOTE:
If the front suspension bottoms too easily or rolls
too much during cornering, increase the air pres-
sure by 34 kPa (0.3 kgf/cm², 5 psi). If the suspen-
sion is too firm and you want a more compliant ride,
decrease the air pressure by 34 kPa (0.3 kgf/cm², 5
psi).
REAR SUSPENSION

Stopper band

1. Adjust:
• Stopper band length
CAUTION:
Make sure the left and right rear suspension
stopper bands are adjusted evenly. (PZ50VT,
PZ50MP)
NOTE:
This adjustment affects the handling characteristics
of the machine.
5
INSP
ADJ