Pz50Vt/Pz50Mp - Yamaha PHAZER PZ50X Supplementary Service Manual

PZ50VT/PZ50MP

1 Corrugated tube (engine stop
switch lead, throttle switch lead,
right grip warmer lead, and
thumb warmer lead)
2 Right grip warmer lead
3 Right handlebar switch
4 Route the throttle cable over the
handlebar.
5 Multi-function meter unit lead
6 Parking brake cable
7 Route the brake hose in front of
the handlebar.
8 Route the left handlebar switch
leads behind the handlebar.
9 Brake master cylinder
0 Left grip warmer lead
A Brake light switch lead
B Corrugated tube (left grip warmer
lead, grip/thumb warmer adjust-
ment switch lead, brake light
switch lead, and headlight beam
switch lead)
C Auxiliary DC jack
D Rectifier/regulator
E Crankshaft position sensor cou-
pler.
F A.C. magneto coupler
G Fuel tank breather hose
H Speed sensor lead
I Pressure regulator hose
J Throttle position sensor coupler
K Throttle body heater hose
L Fasten the A.C. magneto lead,
oil pressure switch lead, and
pressure regulator hose with the
holder.
M Knock sensor
N Fasten the A.C. magneto lead,
water pump outlet hose, and
knock sensor lead with the plas-
tic band.
O Route the A.C. magneto lead
behind the idling adjusting screw.
CABLE ROUTING
95
SPEC