Yamaha PHAZER PZ50X Supplementary Service Manual page 83

G Cylinder #2 ignition coil lead
H Auxiliary DC jack lead
I Frame ground lead
J To the speed sensor
K Connect the sub-wire harness
coupler to the wire harness cou-
pler.
L To the handlebar switch
M Speed sensor lead coupler
N Throttle position sensor coupler
O Oil pressure switch coupler
P To the auxiliary DC jack lead
(PZ50VT/PZ50MP)
Q To the Rectifier/regulator
R Wire harness
S To the sub-wire harness
T To the throttle position sensor
U To the frame ground lead
V To the speed sensor
W To oil pressure switch coupler.
X Fasten the sub-wire harness at
the white tape with the plastic
band.
CABLE ROUTING
77
SPEC