EdTNg Handset Name; ShowNg Handset Name - VTech LS5145 User Manual

System setup
Editing handset name
The handset name can be up to 15 characters ncludng spaces.
To edt the handset name:
1. Press MENU/SEL n dle mode to enter the man menu.
2. Press the UP or DOWN NavKeys to select Settings, then press
MENU/SEL to enter the Settings menu.
3. When Edit Handset Name s hghlghted, press MENU/SEL.
• Press the LEFT and RIGHT NavKey to move the cursor left
and rght.
• Press the ERASE softkey to delete hghlghted characters.
• Use the dal pad to enter up to 15 alphanumerc characters ncludng
spaces (see page 74).
4. Press the SAVE softkey or MENU/SEL to save the settng.
Showing handset name
By default, the handset name s shown on the dsplay when n dle mode.
To change the settng:
1. Press MENU/SEL n dle mode to enter the man menu.
2. Press the UP or DOWN NavKeys to select Settings, then press
MENU/SEL to enter the Settings menu.
3. Press the UP and DOWN NavKeys to hghlght Show Handset Name,
then press MENU/SEL.
4. Press the UP and DOWN NavKeys to hghlght On or Off, then press the
SET softkey or MENU/SEL to save the settng.
If you change ths settng to off, t wll only affect that handset.
www.vtechphones.com
Settngs
Edt Handset Name
• If no characters
Show Handset Name
are entered for the
Keypad Tone
handset name,
Language
Name must not
LCD Contrast
be empty
be shown on the
dsplay. Enter
Edt Handset Name
a name for the
handset.
HANDSET 2
SAVE ERASE
Settngs
Edt Handset Name
Show Handset Name
Keypad Tone
Language
LCD Contrast
Show Handset Name
P On
Off
SET
wll
31