VTech LS5105 Quick Start Manual

Quick start guide

Battery installation

Install the battery as shown below.
1. Press the tab and 2. Insert the plug as
slide the battery indicated. Make sure
compartment cover it is plugged securely
and matches the color-
downwards.
coded label inside the
battery compartment.
3. Place the battery 4. Align the cover flat
with the label THIS
against the battery
SIDE UP facing compartment, then
up and the wires slide it upwards until it
inside the battery clicks into place.
compartment.

Battery charging

For optimal performance, charge the handset
battery for at least 16 hours before use.
for model LS5105
Electrical outlet
not controlled by
a wall switch
Charger
NOTE:
Use only the power adapter and battery supplied
with your VTech telephone.
Power
adapter
Charge light

Registering a handset

To register a new handset:
1. Place the unregistered
handset in the telephone
base.
2. Press the MENU softkey on
the telephone base while in
idle mode.
3. Press the UP and DOWN
Navkeys to highlight Register
Handset, then press the
SELECT softkey.
• Registering Handset will
appear on the telephone
base display.
• Registration in progress...
will appear on the handset
display.
• The registration process
may take up to 90 seconds
to complete.
When the registration process is complete, the
telephone base and handset will generate a
confirmation tone. The newly registered handset
will be assigned the next handset registration
number.
NOTE:
For complete feature instructions, please refer
to your user's manual.
IMPORTANT!
If your product is not working properly:
• Refer to the Troubleshooting section of the
user's manual.
• Visit our website at www.vtechphones.com or
call 1 (800) 595-9511. In Canada, go to www.
vtechcanada.com or 1 (800) 267-7377.
12:00AM
Place in
Charger
12:00AM
Register handset:
Press MENU in the
base. Find 'Register
Handset' in the Main
Menu. Press SELECT.
12:00AM
Registration
in progress...
96-006551-020-100
issue 1