VTech LS5105 Quick Start Manual

Quick start guide

Battery installation

Install the battery as shown below.
1. Press the tab and slide
2. Insert the plug as indicated.
the battery compartment Make sure it is plugged
securely and matches the
cover downwards.
color-coded label inside the
battery compartment.
3. Place the battery with 4. Align the cover flat against
the label THIS SIDE the battery compartment,
UP facing up and the
then slide it upwards until
wires inside the battery it clicks into place.
compartment.

Battery charging

For optimal performance, charge the handset battery for at least 16
hours before use.
for model LS5105
Electrical outlet
not controlled by
a wall switch
Charger
NOTE:
Use only the power adapter and battery supplied with your VTech
telephone.
Power
adapter
Charge light

Registering a handset

To register a new handset:
1. Place the unregistered handset in the
telephone base.
2. Press the MENU softkey on the telephone
base while in idle mode.
3. Press the UP and DOWN Navkeys to
highlight Register Handset, then press the
SELECT softkey.
• Registering Handset will appear on the
telephone base display.
• Registration in progress... will appear on
the handset display.
• The registration process may take up to
90 seconds to complete.
When the registration process is complete, the
telephone base and handset will generate a
confirmation tone. The newly registered handset will
be assigned the next handset registration number.
12:00AM
Place in
Charger
12:00AM
Register handset:
Press MENU in the
base. Find 'Register
Handset' in the Main
Menu. Press SELECT.
12:00AM
Registration
in progress...