Checking Jumper Settings; Jumper Settings - ECS X79R-AX Manual

Checking Jumper Settings

The following illustration shows the location of the motherboard jumpers. Pin 1 is
labeled.

Jumper Settings

Type
Jumper
CLR_CMOS 3-pin Clear CMOS
To avoid the system unstability after clearing CMOS, we recommend users
to enter the main BIOS setting page to "Load Default Settings" and then
"Save and Exit Setup".
Description
1-2: NORMAL
2-3: CLEAR CMOS
Before clearing the
CMOS, make sure to
turn off the system.
Installing the Motherboard
Setting (default)
1
CLR_CMOS
13