Check For Dial Tone; Charge The Handset Battery; Language; Set The Dial Mode - VTech ia5847 User Manual

Installaton
Check for dal tone
After the batteries are charged, pick up the handset and press TALK/FLASH; you should hear a dial
tone. If you do not, refer to the Troubleshootng section in the back of this user's manual.

Charge the handset battery

If battery power is low, NEEDS RECHARGING will appear on the handset. Charge the battery for
at least 16 hours the first time.

Language

• Press PROG, then press
• The current setting blinks. Press
Espanol, Francais).
• Press SELECT to save your selection.
Set the dal mode
If you have touch tone service, the phone is ready to use as soon as the battery is charged. If you
have pulse (rotary) service, you'll need to change the dial mode.
• Press PROG.
• Press or until the screen displays DIAL MODE: and the current setting. until the screen displays
• Press SELECT. The current setting blinks.
• Press or to select to select TONE or PULSE.
• Press SELECT to save.
Set handset date and tme
If you subscribe to caller ID service, the date and time will be set automatically with the first incoming
call. If you do not have caller ID service, you can set the date and time manually:
• Press PROG, then press
• Press SELECT. The month is flashing. Press
• Press SELECT. The day is flashing. Press
• Press SELECT. The hour is flashing. Press
until LANGUAGE is displayed. Press SELECT.
or
or until the screen displays the correct language (English,
until DATE/TIME is displayed.
or
or until the screen displays the correct month.
or until the screen displays the correct day.
or until the screen displays the correct hour.
www.vtechphones.com
• If the phone will
not be used for a
long period of time,
remove the battery
to prevent battery
damage.
• If you have any
trouble installing
your phone, please
visit our website at
www.vtechphones.
com. In Canada go to
www.vtechcanada.
com.