Error Messages And Conditions - Canon imagePRESS Server F200 Installation And Service Manual

Table of Contents

Advertisement

T
ROUBLESHOOTING

Error messages and conditions

To address specific error messages or conditions, see
condition" on page
read about the possible causes, and then perform the suggested actions to solve the problem.
Do not replace the hard disk drive and the motherboard at the same time. Doing so in the
wrong order, without transferring options to the new motherboard, will cause the system to
malfunction.
If troubleshooting strategies (checking cables and connections, reinstalling system software,
and so forth) do not solve the problem and you suspect that the hard disk drive or
motherboard is faulty, note that it is highly unlikely that the hard disk drive and the
motherboard are both defective; therefore, avoid replacing both to solve one problem. Always
troubleshoot in the following order.
1 Replace the hard disk drive and install system software.
Always replace a faulty hard disk drive with a new hard disk drive. Transferring a hard disk
drive from one imagePRESS Server to another is incorrect and strongly discouraged.
2 If the problem persists, reinstall the original hard disk drive in the system, and then replace
the motherboard.
If replacing a component does not correct the problem, make sure that you reinstall the old
component back in the imagePRESS Server.
95. Use the table to locate the problem or symptom that you want to fix,
"imagePRESS Server error messages and
94

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents