User Interface Board Assembly - Canon imagePRESS Server F200 Installation And Service Manual

R
EPLACING PARTS
5 Place the copier interface board in an antistatic bag.
T
O REPLACE THE COPIER INTERFACE BOARD
1 Seat the copier interface board in the mother connector, and then secure it to the chassis
with the board mounting bracket screw that you removed earlier.
The copier interface board edge connector is keyed to fit in the motherboard connector only
when properly oriented.
2 Reassemble the imagePRESS Server and verify its functionality (see

User interface board assembly

The user interface board (UIB) provides the interface between the imagePRESS Server and
the user. The front of the UIB contains circuitry for the following:
• Activity lights (amber, green, and red LEDs)
• Display window (LCD)
• Four line selection buttons
• Up and Down buttons
• Menu button
• Jewel lights
41
page 78).