Installation
Table/Desk Installation
Connect the
power cord.
1. Check for Dial Tone
After the batteries are charged, pick up the handset and press PHONE, you
should hear a dial tone.
2. Set Time and Date
If you subscribe to caller ID service, the date and time will be set automatically with
the first incoming call. If you do not have caller ID service, you can set the date
and time manually.
• Press PROG, and then press
SELECT.
• The month is flashing. Press
month. Press SELECT.
• The day is flashing. Press
Press SELECT.
• The hour is flashing. Press
Press SELECT.
• The minute is flashing. Press
minute. Press SELECT.
• AM or PM is flashing. Press
91-000171-030-000 manual.pmd
Connect the telephone
line cord
or
until DATE/TIME is displayed. Press
or
until the screen displays the correct
or
until the screen displays the correct day.
or
until the screen displays the correct hour.
or
until the screen displays the correct
or
to choose AM or PM. Press SELECT.
9
9
11/1/2005, 12:46 PM