Edit A Number/Name Stored In The Directory; Delete A Number/Name Stored In The Directory - VTech Cordless Telephone User Manual

Telephone Directory
to alert you that the calls from this number by changing to a distinctive ringer
after the first ring. Choose N for a normal ringer.
8. Press SELECT or PROG to confirm your selection. If you chose Y in Step 7,
D
a will be displayed with the directory entry.
NOTE: When the memory is full the screen will display MEMORY FULL, an error
tone sounds and you will not be able to store a new number until you delete a
stored number to make room for another entry.

Edit a Number/Name Stored in the Directory

1. Press (DIR). The screen displays DIRECTORY.
2. Press or to scroll alphabetically through entries stored in directory.
— OR —
Press the dial pad key for the first letter of the entry you want to edit.
3. When the screen displays the entry you want to edit, press SELECT. Then
press until EDIT flashes.
SPEED EDIT EDIT EDIT EDIT EDIT
8005959511
4. Press SELECT. The screen displays the name and number. The cursor
appears at the end of the name. Use
name. Press SELECT to confirm and move on to edit the number. Use
backspace and make corrections. Press SELECT to confirm and move to
edit the distinctive ring setting.
5. Press SELECT to save the edited information.

Delete a Number/Name Stored in the Directory

1. Press (DIR). The screen displays DIRECTORY.
2. Press or to scroll alphabetically through entries stored in directory.
— OR —
Press the dial pad key for the first letter of the entry you want to delete.
3. When the screen displays the entry you want to delete, press SELECT.
Then press
SPEED EDIT
8005959511
4. Press SELECT. The screen displays ERASE NO YES and the number. The
current choice flashes.
5. Press until YES flashes.
6. Press SELECT. You'll hear a confirmation beep.
91-000171-030-000 manual.pmd
ERASE
until ERASE flashes.
ERASE ERASE
ERASE ERASE ERASE
19
19
, and the dial pad keys to edit the
11/1/2005, 12:46 PM
to