Table/Desk Installation - VTech T2447 User Manual

Installation

Table/Desk Installation

Connect the
power cord.
1. Check for Dial Tone
After the battery is charged, pick up the Handset and press PHONE, you should
hear a dial tone.
2. Set Time and Date
If you subscribe to Caller ID service, the date and time will be set automatically with
the first incoming call. If you do not have Caller ID service, you can set the date
and time manually.
• Press PROG, and then press
SEL.
• The month is flashing. Press
month. Press SEL.
• The day is flashing. Press
Press SEL.
• The hour is flashing. Press
Press SEL.
• The minute is flashing. Press
minute. Press SEL.
• AM or PM is flashing. Press
Connect the telephone
line cord
or until DATE/TIME is displayed. Press
or until the screen displays the correct
or until the screen displays the correct day.
or until the screen displays the correct hour.
or until the screen displays the correct
or to choose AM or PM. Press SEL.
8