Table of Contents
Advertisement
TELEPHONE DIRECTORY
4
When you finish entering the name, press
PROG/CHAN
.The screen displays
5
Enter the telephone number. Use
correction. Press
sequence.
—OR—
REDIAL/PAUSE
Press
6
SELECT
Press
or
7
Press
or
to change the setting. Choose
the phone to alert you to calls from this number by changing to a
distinctive ringing pattern after the first ring. Choose
for a normal ringing pattern.
SELECT
8
Press
or
chose
in Step 7,a
Note:
When memory is full the screen displays
tone sounds, and you will not be able to store a new number until you delete a
stored number.
Edit a Number/Name Stored in the Directory
1
Press
(
). The screen displays
2
Press
or
to scroll alphabetically through entries
stored in memory
—OR—
Press the dial pad key for the first letter of the entry you want to edit.
3
When the screen displays the number you want to edit, press
SELECT
. Then press
EDIT
SELECT
4
Press
. The screen displays the name and number. The
flashing cursor appears at the end of the name. Use
the dial pad keys to edit the name. Press
edit the number. Press
Ring setting.
SELECT
5
Press
to save the edited information.
to backspace and make a
REDIAL/PAUSE
to store a pause in the dialing
to display the last number dialed from this phone.
PROG/CHAN
. The screen displays
and the current setting.
PROG/CHAN
to confirm your selection. If you
will be displayed with the directory entry.
or
until
SELECT
to move to edit the Distinctive
16
SELECT
or
.
(for Yes) if you wish
(for No)
, an error
.
flashes.
,
and
SELECT
to move on to
Advertisement
Table of Contents
