Preparation for Use
Introduction
2 Preparation for Use
Introduction
This chapter explains how to install the 16200B External DC Bias Adapter. The
topics covered include initial inspection, ambient environmental
considerations, connecting the adapter for use, and repacking the adapter.
Initial Inspection
The adapter has been carefully inspected electrically and mechanically before
being shipped from the factory. It should be in perfect physical condition, no
scratches, dents or the like, and it should be in perfect electrical condition.
Verify the adapter's physical condition by carefully performing an incoming
inspection to check the adapter for signs of physical damage and missing
contents. If any discrepancy is found, notify the carrier and Keysight
Technologies promptly. Your Keysight Technologies sales office will arrange for
repair and replacement without waiting for the claim to be settled.
1. Inspect the shipping container for damage, and keep the shipping materials
2. Verify that the shipping container contains everything listed in
3. Inspect the exterior of the 16200B for any signs of damage.
Keysight 16200B External DC Bias Adapter
until the inspection is satisfactorily completed.
Table
2-1.
9