Summary of Contents for Keysight Technologies 86211A
Page 1
Keysight 86211A 75 Ohm Type-F Adapter Kit Operating and Service Manual...
Page 2
27.401 or DFAR 227.7103-5 (c), as applicable adhered to, could result in personal injury or in any technical data. death. Do not proceed beyond a WARNING notice until the indicated conditions are fully understood and met. Keysight 86211A Operating and Service Manual...
To contact Keysight for sales and technical support, refer to the support links on the following Keysight websites: – www.keysight.com/find/adapters (product-specific information and support, software and documentation updates) – www.keysight.com/find/assist (worldwide contact information for repair and service) Keysight 86211A Operating and Service Manual...
Page 4
THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK. Keysight 86211A Operating and Service Manual...
....16 Table 2-4 Equipment and supplies for the 86211A ..... . . 17...
Page 10
THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK. Keysight 86211A Operating and Service Manual...
Page 11
Keysight 86211A 75 Ohm Type-F Adapter Kit Operating and Service Manual Introduction General Information Product Overview This chapter provides an overview of the Keysight 86211A 75 Ohm Type-F Adapter Kit.
It can be viewed online by searching for part number 08510-90064 at http://www.keysight.com. – Periodically gage the adapter connectors using the instructions provided in the Connector Care for RF and Microwave Coaxial Connectors document. Keysight 86211A Operating and Service Manual...
Introduction Product Overview The 86211A 75 Ohm Type-F Adapter Kit contains the adapters required for interconnections and test setups between 75 W systems or devices with type-N connectors and devices with 75 W type-F connectors. Contents The 86211A adapter kit contains the following items: –...
Page 14
Introduction THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK. Keysight 86211A Operating and Service Manual...
Page 15
Switch Configuration Switch Configuration Performance Characteristics Electrical Characteristics General Characteristics Replaceable Parts Equipment and Supplies Connector Maintenance This chapter provides the characteristics and maintenance information for the 86211A adapter kit. Keysight 86211A Operating and Service Manual...
General characteristic 86211A Net weight 0.45 kg (1 lb.) Shipping weight 0.91 kg (2 lb.) Replaceable Parts There are no replaceable components for the adapters. A worn or damaged adapter must be replaced in whole. Keysight 86211A Operating and Service Manual...
Switch Configuration Equipment and Supplies The following equipment and supplies are required for the maintenance and use of, but are not supplied with, your 86211A adapter kit. Table 2-4 Equipment and supplies for the 86211A Item Part number Type-N gage set (part of the 85032F calibration kit) 85054-60059 Torque wrench, 3/4”, 136 N-cm (12 in-lb)
Page 18
Switch Configuration THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK. Keysight 86211A Operating and Service Manual...
Need help?
Do you have a question about the 86211A and is the answer not in the manual?
Questions and answers