Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sharp VC-H85X
Summary of Contents for Sharp VC-H85X
-
Page 3: Location And Handling
Copyright may exist on material you wish to record. Copying such material without permission of the relevant licensees or owners of the copyright is prohibited by law. Sharp is not in a position to authorize the recording of copyrighted works and nothing in this operation manual should be read or Do not insert or drop anything into the VCR implied as giving that authority. -
Page 5: Cable Connections
Cable Connections Disconnecting TV Cable Disconnect the aerial cable from the back of your TV set. ANTENNA IN From AUDIO OUT Connected to outdoor or indoor aerial cable Connecting Aerial Cable to VCR Connect the aerial cable to the ANTENNA IN terminal of your VCR. From VIDEO OUT To ANTENNA IN Connecting VCR to TV... -
Page 7: Inserting The Batteries
The remote control lets you operate your VCR at a distance. Just aim the front of the remote control at the photoreceptor window situated on the front panel Remote Control LCD of your VCR and press the control buttons as you would on your VCR. - Page 9 Press the CLOCK button. “12H” P r e s s t h e C L O C K b u t t o n . disappears, and “12:OO AM” starts flashing. You can set the starts flashing. Set the ‘year’ present time using either the 0 digits by pressing the 0 or 0 and 0 buttons or the numeric...
-
Page 11: Channel Skip
Channel Skip Cancelling Channel Skip Select the video channel on your TV. Press the OPERATE button to turn If there are channel positions that are not preset, you can skip them by the on the VCR. following procedure. Press the CH SET button to select the channel setting mode. Example: Skip Channel Position 12 Press the CHANNEL up/down buttons to select the channel position number you want to reset. -
Page 13: Slow Motion Playback
Al (Artificial Intelligence) Picture System Video Search This VCR has the functions described below to play back recorded tapes more Use the following procedure to quickly find the section you want, while viewing clearly, for more enjoyment. the picture. Auto Head Cleaning System REW button for reverse search. -
Page 15: Cassette Erase Protection
Cassette Erase Protection ERASURE To Watch Another TV Programme While Recordina PROTECTION TAB After steps @ to @ have been completed, select the programme you wish to zew using the TV tuner. accidental erasure of recorded material. Removing the At the end of the tape, your VCR will automatically stop recording, rewind the tape, tab prevents recording. - Page 17 With this feature, a desired programme or scene can be played back Any selected mode on the VCR can be locked-in to prevent accidental change repeatedly. to another mode by simply pressing the C-LOCK button on the remote control. All modes remain locked (including power-off) until the Child-Proof Lock is disengaged.
-
Page 19: Cancelling Timer Settings
NOTES: Press the PROG button. The start time display cassette runs If the video out before recording all the programmes, your VCR will disappears and the stop (finish) time display stop, eject the cassette, and shut off automatically. starts flashing. Set the stop time using the 0 or If power is interrupted for more than 60 minutes (power failure, etc.), all timer settings will be cancelled. -
Page 21: Counter Display
Tape movement can be confirmed in hours, minutes and seconds with the 5 During timer recording or Simple Recording Timer, the display shows the digit display. Changing of the display and counter clearing are operated by the record finish time. When the DISPLAY button is pressed, the display changes remote control. - Page 23 (If this is the case, the heads need to be cleaned. Ask the retailer or a Sharp approved service centre.) No picture appears or Make sure the TV is set to the same channel...
Need help?
Do you have a question about the VC-H85X and is the answer not in the manual?
Questions and answers