Table of Contents
Advertisement
Product Overview
ICX-250 Specifications
Chassis
Height
Specification
Width
Depth
Weight
Installation
Power Supply
AC
DC
Ring Generator
Environment
Operating Temperature
Storage Temperature
Relative Humidity
Regulatory
Compliance
FCC Regulatory #
Product Numbers
240212
240224
T1 Interface
Physical
Frame Format
Line Code
CSU Line Build Out
(LBO)
DSX Line Length
Clocking
FDL
FXS Interface
Physical
FXS Supervision Mode
FXS Signaling
TLP
Impedance
Ringing Voltage
Data Interface
Physical
Data Rate
Diagnostics
DIP Switch
Settings
Issue 1, September 1998
© 1998, ADC Telecommunications, Inc.
1.75 inches (with feet 2 inches)
17.25 inches
12 inches
Approximately 10 pounds
Desktop
Wall Mount
Rackmount
120V .6A Max. 60Hz (104 - 140 VAC)
–48V, –24V, or +24V 1.8A Max. (22.5 - 57 VDC)
Integrated AC/DC converter and Ringing Generator
Nominal 50 VRMS
Frequency 20 +/–1 Hz
DC component: –30 volts nominal
Crest factor cf, where 1.2=<cf=<1.6
Ringing Capability: 40 Vrms across 1 REN at the end of a 400 ohms loop.
0
0
0
C to 40
C
0
0
–40
C to 66
C
5 to 85% Humidity, Non-Condensing
FCC Part 15 Class A
UL 1950 and CSA C22.2 950
FCC Part 68 and Industry Canada CS-03
1H5USA-32637-DE-N
12 FXS ports, 2 EIA530A/V.35 data ports
24 FXS ports, 2 EIA530A/V.35 data ports
One RJ48
D4, ESF, TR-08
AMI, B8ZS
0 dB, –7.5 dB, –15.0 dB
0.6 dB at 0-266 ft., 1.8 dB at 266 - 533 ft., 3.0 dB at 533 - 655 ft.
Internal Stratum 4, Line
Per ANSI T1.403 and AT&T TR62411
One 50-pin Female Amphenol
FXS, FXS-DN, FXS-DN-Wink, TR-08
Loop Start, Ground Start, Loop Start w/ forward Disconnect, Ground
Start Immediate, Ground Start Automatic, Universal Voice Grade,
Universal Voice Grade Automatic, Single-Party
–3 dB/–9 dB on Rx, + 3 dB/+9 dB on Tx
600 Ohm
50 Vrms
On hook transmission for Caller ID support
Two (2) EIA530A/V.35 ports (DB25)
Nx56K, Nx64K (N = 1 to 24)
Extensive power-up self test
LED Indicators
QRSS Test Pattern on T1
2047 Test Pattern on Data ports
Loopbacks for FXS, T1 and Data ports
CSU Loopback detection
Performance statistics over FDL
Bantam jacks for in-session T1 monitoring and line testing
FXS, T1, Data port Loopbacks, CSU Loopback Detection, Clocking,
T1 Frame Format, T1 Line Code, T1 Line Build Out, FXS TLP, FXS
Supervision, FXS Signaling, Trunk Conditioning, Test Patterns, Data rate.
Welcome
5
ADCP-62-023
Advertisement
Table of Contents
