Wall Mounting - ADC ICX-250 User Manual

12 System Basics

Wall Mounting

Prior to wall mounting check to see if the environment is stable and free
from any extreme temperatures, humidity or vibrations of any sort. The
unit should be mounted with the fan to the top with at least 2 inches of
clear space on the sides, above, and below for adequate air flow. Allow at
least 6 inches for cable clearance and access to switches.
When attaching unit(s) to a wall make sure that appropriate fasteners such
as masonry anchors, heavy duty wood screws or expansion bolts are used
for heavy objects.
A N G LE BR A C K E T
ADCP-62-023
!!ATTENTION!!
mounting brackets, top cover cannot be removed
once brackets are in place.
Note: Additional support hardware may be necessary
(not included with unit) to secure the unit properly to
the wall. If the surface is not solid enough to hold the
unit and attached cabling, it is recommended that a
small piece of 3/4" plywood be fastened to the wall before
attaching the unit. This will help ensure a more stable environment.
Installing the ICX-250
Set all options prior to installing
W all
Issue 1, September 1998
© 1998, ADC Telecommunications, Inc.