Wireless Bridge - TP-Link TD-W8968 User Manual

4.6.5 Wireless Bridge

Go to Wireless → Wireless
as below. You can configure wireless bridge features of the wireless LAN interface and click
Apply/Save to save the current configuration.
AP Mode: Select an AP Mode from the drop-down list. Options available are: Access Point

and Wireless Bridge.
 Access Point:
access.
 Wireless Bridge:
wireless stations which also in bridge mode to connect two or more remote LANs.
Bridge Restrict:

 Disabled: Select this option to disables wireless bridge restriction, and any wireless
bridge will be granted access.
 Enabled: Select this option (as shown below) to enables wireless bridge restriction,
please enter the MAC address of the Remote Bridges that you want to connect with,
and only these Remote Bridges are granted access.
 Enabled (Scan):
the environment for APs that exist around the device. Only those selected AP will be
granted access.
 Refresh: Click this button to scan and display the APs.
Bridge, you will see the screen of
Select this option to allow wireless stations including AP clients to
Also known as WDS (Wireless Distribution System), it will bridges the
Select this option to enable wireless bridge restriction, and it will scan
Wireless--Bridge
77
TD-W8968 User Guide
settings shown