Security - TP-Link TD-W8968 User Manual

TD-W8968 User Guide
4.4.6.4 ALG
Go to Advanced Setup → NAT → ALG, and then you can configure the basic security in the
screen as shown below.
Click Save/Apply to save your settings.

4.4.7 Security

Go to Advanced Setup → Security, and you will see the security screen including IP Filtering
and MAC Filtering (only effective in Bridging mode) submenus.
4.4.7.1 IP Filtering
The IP address filtering feature makes it possible for administrators to control user's access to
the Internet, which is based on user's IP. The IP address filtering here means Outgoing, the
detailed descriptions are provided below.
Go to Advanced Setup → Security → IP Filtering, you can configure Outgoing Filtering rules on
the screen below.
The Outgoing IP Filtering feature allows you to control some IP traffic from LAN to access to
some specifically addresses. By default, all outgoing IP traffic from LAN is allowed, but some IP
traffic can be BLOCKED by setting up filters.
Set up an Outgoing IP Filtering rule:
1. Click Add on the screen above, and you will see the next screen as shown below.
38