TP-Link TD-W8968 User Manual page 41

2. Select the application from the drop-down list. If the list does not have the application that
you want, select the
application in the text box.
3. Enter the Trigger Port
table, and then select the
4. Click Save/Apply
Triggering Setup Table.

Note:
If you select the application from the drop-down list, the External Port Start, External Port End,
Internal Port Start, Internal Port End and the Protocol will be added in the table automatically.
4.4.6.3 DMZ Host
Go to Advanced Setup
The DMZ host feature can make a local host be exposed to the Internet for a special-purpose
service, such as online gaming or video conferencing.
To add a new DMZ Host:
You can enter the computer's IP address and then click
you set on this page.

Note:
DMZ host forwards all the ports at the same time. Any PC whose port is being forwarded must
have its DHCP client function disabled and should have a new static IP Address assigned to it
because its IP Address may change while using the DHCP function.
Custom application
Start, Trigger Port
Trigger protocol
to enable the settings and then you will see your settings on Port
→ NAT → DMZ Host, and you can set up DMZ Host on the screen below.
radio button, and type the name of the custom
End, Open Port Start
and Open protocol, TCP,
Save/Apply
37
TD-W8968 User Guide
and Open Port End in the
UDP or TCP/UDP.
to activate the DMZ host