TP-Link TD-W8968 User Manual page 50

Queue Precedence:

DSL Latency: Select latency path for the type of data transmission, only Path0 is available

for this modem router.
After you specify the condition, click
settings on QoS Queue Setup screen.

Note:
1) Lower integer values for precedence imply higher priority for this queue relative to others.
2) The queue entry configured here will be used by the classifier to place ingress packets
appropriately.
4.4.9.2 QoS Classification
This section will guide you to create a traffic class rule to classify the upstream traffic, assign
queue which defines the precedence and the interface and optionally overwrite the IP header
DSCP byte.
A rule consists of a class name and at least one condition below. All of the specified conditions
in this classification rule must be satisfied for the rule to take effect.
Click Add, and you can configure the QoS on the next screen.
Specify precedence for this QoS queue entry.
Save/Apply to save the entry and then you will see you
46
TD-W8968 User Guide