TP-Link TD-W8968 User Manual page 29


Note:
If only single PVC with IPoA is configured, you must enter static DNS server IP addresses.
8. On the next screen you will see the detailed settings you've made. Please click
to save these settings.
4.4.2.3 ATM-EoA-Bridging
If you want to adopt the
below to add a WAN service over a selected ATM interface:
1. Add a new ATM interface and select
Interface).
2. Click Add in the WAN Port Information Table. Select WAN Service Interface over ATM PVC
on the next screen.
3. Select Bridging option for the
And you will see the detailed settings you've made. Please click
4.
settings.
Bridge service, you need to use an ATM Interface. Follow the steps
EoA
WAN service type
25
option for DSL Link Type (see
on the screen, and click
Apply/Save
TD-W8968 User Guide
Apply/Save
4.4.1.1 ATM
Next to continue.
to save these