Note:
In this type, there should not have any IPv4 WAN connections. If there are IPv4 WAN
connections, the page will prompt you to delete all the IPv4 WAN connections.
4.4.17 IPSec
Go to
Advanced Setup
connections on the screen below.
This section will guide you to configure a VPN tunnel between two TD-W8968s. The topology is
as follows.
Note:
You could also use other VPN routers to set VPN tunnels with TD-W8968. TD-W8968 supports
up to 10 VPN tunnels simultaneously.
Click
Add New Connection
→ IPSec, you can Add/Remove or Enable/Disable the IPSec tunnel
and then you will enter the screen below.
57
TD-W8968 User Guide