ECS 848P-A7 Manual
  1. Manuals
  2. Brands
  3. ECS Manuals
  4. Motherboard
  5. 848P-A7
  6. Manual
ECS 848P-A7 Manual

ECS 848P-A7 Manual

Hide thumbs
Table of Contents
  • Table of Contents

  • Chapter 1 Introducing the Motherboard
    • Introduction
    • Feature
    • Motherboard Components

  • Chapter 2 Installing the Motherboard
    • Safety Precautions
    • Choosing a Computer Case
    • Installing the Motherboard in a Case
    • Checking Jumper Settings
      • Setting Jumpers
      • Checking Jumper Settings
      • Jumper Settings
    • Connecting Case Components
      • Front Panel Connector
    • Installing Hardware
      • Installing the Processor
      • Installing Memory Modules
      • Installing a Hard Disk Drive/CD-ROM/SATA Hard Drive
      • Installing a Floppy Diskette Drive
      • Installing Add-On Cards
      • Connecting Optional Devices
    • Connecting I/O Devices

  • Chapter 3 Using BIOS
    • About the Setup Utility
      • The Standard Configuration
      • Entering the Setup Utility
      • Updating the BIOS
    • Using BIOS
      • Standard CMOS Features
      • Advanced BIOS Features
      • Advanced Chipset Features
    • Integrated Peripherals
    • Power Management Setup
    • PNP/PCI Configurations
    • PC Health Status
    • Frequency/Voltage Control
    • Load Performance Defaults
    • Load Optimized Defaults
    • Set Supervisor/User Password
    • Save & Exit Setup Option
    • Exit Without Saving

  • Chapter 4 Using the Motherboard Software
    • About the Software CD-ROM
    • Auto-Installing under Windows 98/ME/2000/XP
      • Running Setup
    • Manual Installation
    • Utility Software Reference

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 61

Quick Links

Download this manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 848P-A7 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ECS 848P-A7

Summary of Contents for ECS 848P-A7

  • Page 3 Preface Copyright This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author. Version 5.0 Disclaimer The information in this document is subject to change without notice.
  • Page 4 Declaration of Conformity This device complies with part 15 of the FCC rules. Operation is subject to the following conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation Canadian Department of Communications This class B digital apparatus meets all requirements of the Canadian Interference-causing Equipment Regulations.

  • Page 5: Table Of Contents

    T T T T T ABLE OF CONTENTS ABLE OF CONTENTS ABLE OF CONTENTS ABLE OF CONTENTS ABLE OF CONTENTS Preface Chapter 1 Introducing the Motherboard Introduction....................1 Feature......................2 Motherboard Components................4 7 7 7 7 7 Chapter 2 Installing the Motherboard Safety Precautions..................7 Choosing a Computer Case...............7 Installing the Motherboard in a Case............7...
  • Page 6 Integrated Peripherals..............35 Power Management Setup............39 PNP/PCI Configurations..............41 PC Health Status................42 Frequency/Voltage Control............43 Load Performance Defaults .............44 Load Optimized Defaults.............44 Set Supervisor/User Password............44 Save & Exit Setup Option.............45 Exit Without Saving..............45 Chapter 4 47 47 47 47 47 Using the Motherboard Software About the Software CD-ROM..............47 Auto-installing under Windows 98/ME/2000/XP........47 Running Setup................48...

  • Page 7: Introducing The Motherboard

    Chapter 1 Introducing the Motherboard Introduction Thank you for choosing the 848P-A7 motherboard. This motherboard is a high perfor- mance, enhanced function motherboard designed to support the LGA775 Socket Intel Pentium 4/Celeron D/Pentium D processors for high-end business or personal desktop markets.

  • Page 8: Feature

    Feature Processor This motherboard uses an LGA775 type of Pentium 4/Celeron D/Pentium D that carries the following features: • Accommodates Intel Pentium 4/Celeron D/Pentium D processors • Supports a system bus (FSB) of 800/533 MHz • Supports “Hyper-Threading” technology CPU “Hyper-Threading”...
  • Page 9 Onboard LAN (Optional) This motherboard may support either of the following LAN chipset: • Supports 10/100 Mb/s N-Way Auto negotiation operation • Half/Full duplex capability • Supports Wake-On-LAN(WOL) function and remote wake-up • Integrate 10/100/1000 transceiver • Supports PCI v2.3, 32-bit, 33/66 MHz •...

  • Page 10: Motherboard Components

    Motherboard Components Introducing the Motherboard...
  • Page 11 Table of Motherboard Components LABEL COMPONENT LGA775 socket for latest Intel Pentium 4/Celeron 1 CPU Socket D/Pentium D CPUs 2 CPU_FAN CPU cooling fan connector 3 DIMM1~2 184-pin DDR SDRAM slots 4 FDD Floppy diskette drive connector 5 ATX1 Standard 20-pin ATX power connector 6 IDE1 Primary IDE connector 7 IDE2...
  • Page 12 Memo Introducing the Motherboard...

  • Page 13: Installing The Motherboard

    Chapter 2 Installing the Motherboard Safety Precautions • Follow these safety precautions when installing the motherboard • Wear a grounding strap attached to a grounded device to avoid damage from static electricity • Discharge static electricity by touching the metal case of a safely grounded object before working on the motherboard •...

  • Page 14: Checking Jumper Settings

    Do not over-tighten the screws as this can stress the motherboard. Checking Jumper Settings This section explains how to set jumpers for correct configuration of the motherboard. Setting Jumpers Use the motherboard jumpers to set system configuration options. Jumpers with more than one pin are numbered.

  • Page 15: Checking Jumper Settings

    Checking Jumper Settings The following illustration shows the location of the motherboard jumpers. Pin 1 is labeled. Jumper Settings Type Jumper Description Setting (default) 1-2: ENABLE 3-pin LAN FUNCTION 2-3: DISABLE 1-2: CLEAR 2-3: NORMAL CLR_CMOS 3-pin CLEAR CMOS Before clearing the CMOS, make sure to turn off the system.

  • Page 16: Connecting Case Components

    Connecting Case Components After you have installed the motherboard into a case, you can begin con- necting the motherboard components. Refer to the following: Connect the CPU cooling fan cable to CPU_FAN. Connect the case cooling fan connector to SYS_FAN. Connect the power fan connector to PWR_FAN (optional).
  • Page 17 SPK1: Internal speaker Signal Name Signal ATX1: ATX 20-pin Power Connector Signal Name Signal Name +3.3V +3.3V +3.3V -12V Ground Ground PS ON# Ground Ground Ground Ground Ground PWRGD +5VSB +12V ATX12V: ATX 12V Power Connector Signal Name Ground Ground +12V +12V Installing the Motherboard...

  • Page 18: Front Panel Connector

    Front Panel Connector The front panel connector (F_PANEL) provides a standard set of switch and LED connec- tors commonly found on ATX or micro-ATX cases. Refer to the table below for informa- tion: Signal Function Signal Function HD_LED_P Hard disk LED(+) FP PWR/SLP *MSG LED(+) HD_LED_N Hard disk LED(-) FP PWR/SLP *MSG LED(-)

  • Page 19: Installing Hardware

    Installing Hardware Installing the Processor Caution: When installing a CPU heatsink and cooling fan make sure that you DO NOT scratch the motherboard or any of the surface-mount resistors with the clip of the cooling fan. If the clip of the cooling fan scrapes across the motherboard, you may cause serious damage to the motherboard or its components.
  • Page 20 CPU Installation Procedure The following illustration shows CPU installation components. A. Read and follow the instructions shown on the sticker on the CPU cap. B. Unload the cap · Use thumb & forefinger to hold the lifting tab of the cap. ·...

  • Page 21: Installing Memory Modules

    Installing Memory Modules This motherboard accommodates two memory modules. It can support two 184-pin unbuf- fered DIMMs, DDR400/333/266. The total memory capacity is 2 GB. DDR SDRAM memory module table Memory module Memory Bus 133MHz DDR266 DDR333 166MHz 200MHz DDR400 You must install at least one module in any of the two slots.
  • Page 22 Table A: DDR (memory module) QVL (Qualified Vendor List) The following DDR400 memory modules have been tested and qualified for use with this motherboard. Size Vendor Module Name Infineon HYS64D16301GU-5-B 128MB NANYA NT128D64SH4B1G-5 NANYA NT128D64SH4B1G-5T Infineon HYS64D32300GU-5-B Infineon HYS64D32300HU-5-C Micron MT8VDDT3264AG-40BC4 256MB NANYA...

  • Page 23: Installing A Hard Disk Drive/Cd-Rom/Sata Hard Drive

    Installing a Hard Dish Drive/CD-ROM/SATA Hard Drive This section describes how to install IDE devices such as a hard disk drive and a CD-ROM drive. About IDE Devices Your motherboard has a primary and secondary IDE channel interface (IDE1 and IDE2). An IDE ribbon cable supporting two IDE devices is bundled with the motherboard.
  • Page 24 About SATA Connectors This motherboard features two SATA connectors supporting a total of two drives. SATA refers to Serial ATA (Advanced Technology Attachment) is the standard interface for the IDE hard drives which are currently used in most PCs. These connectors are well designed and will only fit in one orientation.

  • Page 25: Installing A Floppy Diskette Drive

    Installing a Floppy Diskette Drive The motherboard has a floppy diskette drive (FDD) interface and ships with a diskette drive ribbon cable that supports one or two floppy diskette drives. You can install a 5.25-inch drive and a 3.5-inch drive with various capacities. The floppy diskette drive cable has one type of connector for a 5.25-inch drive and another type of connector for a 3.5-inch drive.

  • Page 26: Installing Add-On Cards

    Installing Add-on Cards The slots on this motherboard are designed to hold expansion cards and connect them to the system bus. Expansion slots are a means of adding or enhancing the motherboard’s features and capabilities. With these efficient facilities, you can increase the motherboard’s capabili- ties by adding hardware that performs tasks that are not part of the basic system.

  • Page 27: Connecting Optional Devices

    Follow these instructions to install an add-on card: Remove a blanking plate from the system case corresponding to the slot you are going to use. Install the edge connector of the add-on card into the expansion slot. Ensure that the edge connector is correctly seated in the slot. Secure the metal bracket of the card to the system case with a screw.
  • Page 28 SPDIF1: SPDIF out header This is an optional header that provides an S/PDIF (Sony/Philips Digital Interface) output to digital multimedia device through optical fiber or coaxial connector. Signal Name Function SPDIF digital output SPDIF 5V analog Power +5VA No pin Ground F_AUDIO: Front Panel Audio header This header allows the user to install auxiliary front-oriented microphone and line-out ports...
  • Page 29 F_USB3/4: Front Panel USB header The motherboard has four USB ports installed on the rear edge I/O port array. Additionally, some computer cases have USB ports at the front of the case. If you have this kind of case, use auxiliary USB connector to connect the front-mounted ports to the motherboard. Signal Name Function USBPWR...

  • Page 30: Connecting I/O Devices

    Connecting I/O Devices The backplane of the motherboard has the following I/O ports: PS2 Mouse Use the upper PS/2 port to connect a PS/2 pointing device. PS2 Keyboard Use the lower PS/2 port to connect a PS/2 keyboard. Parallel Port (LPT1) Use LPT1 to connect printers or other parallel communications devices.

  • Page 31: Using Bios

    Chapter 3 Using BIOS About the Setup Utility The computer uses the latest Award BIOS with support for Windows Plug and Play. The CMOS chip on the motherboard contains the ROM setup instructions for configuring the motherboard BIOS. The BIOS (Basic Input and Output System) Setup Utility displays the system’s configura- tion status and provides you with options to set system parameters.
  • Page 32 Press DEL to enter SETUP Pressing the delete key accesses the BIOS Setup Utility: Phoenix-AwardBIOS CMOS Setup Utility: Standard CMOS Features Frequency/Voltage Control Advanced BIOS Features Load Performance Defaults Advanced Chipset Features Load Optimized Defaults Integrated Peripherals Set Supervisor Password Power Management Setup Set User Password PnP/PCI Configurations...

  • Page 33: Updating The Bios

    Updating the BIOS You can download and install updated BIOS for this motherboard from the manufacturer’s Web site. New BIOS provides support for new peripherals, improvements in performance, or fixes for known bugs. Install new BIOS as follows: If your motherboard has a BIOS protection jumper, change the setting to allow BIOS flashing.

  • Page 34: Standard Cmos Features

    Standard CMOS Features This option displays basic information about your system. Phoenix-AwardBIOS CMOS Setup Utility Standard CMOS Features Date (mm:dd:yy) Mon, Nov 17 2005 Time (hh:mm:ss) 13 : 4 : 54 Item Help IDE Channel 0 Master IDE Channel 0 Slave IDE Channel 1 Master Menu Level IDE Channel 1 Slave...
  • Page 35 IDE Channel 0/1 Master/Slave (Auto) Leave this item at Auto to enable the system to automatically detect and configure IDE devices on the channel. If it fails to find a device, change the value to Manual and then manually configure the drive by entering the characteristics of the drive in the items described below.

  • Page 36: Advanced Bios Features

    Advanced BIOS Features This option defines advanced information about your system. Phoenix-AwardBIOS CMOS Setup Utility Advanced BIOS Features CPU Feature [Press Enter] Item Help Hard Disk Boot Priority [Press Enter] CPU L3 Cache [Enabled] Menu Level Hyper-Threading Technology [Enabled] Quick Power On Self Test [Enabled] First Boot Device [Floppy]...
  • Page 37 TM2 Bus Ratio (0X) This item helps you to set the frequency (bus ratio) of the throttled performance that will be initiated when the on-die sensor goes from not hot to hot. You may set the bus ratio number from 0-255. This feature is available when CPU supports Thermal Monitor 2. TM2 Bus VID (0.8375V) This item helps you to set the voltage of the throttled performance that will be initiated when the on-die sensor goes from not hot to hot.
  • Page 38 First/Second/Third Boot Device (Floppy/Hard Disk/CDROM) Use these three items to select the priority and order of the devices that your system searches for an operating system at start-up time. Boot Other Device (Enabled) When enabled, the system searches all other possible locations for an operating system if it fails to find one in the devices specified under the First, Second, and Third boot devices.

  • Page 39: Advanced Chipset Features

    Small Logo (EPA) Show (Disabled) Enables or disables the display of the EPA logo during boot. Advanced Chipset Features These items define critical timing parameters of the motherboard. You should leave the items on this page at their default values unless you are very familiar with the technical specifications of your system hardware.
  • Page 40 Memory Frequency For (Auto) This item sets the main memory frequency. When you used an external graphics card, you can adjust this to enable the best performance for your system. System BIOS Cacheable (Disabled) When this item is enabled, the System BIOS will be cached for faster execution. Video BIOS Cacheable (Disabled) When this is enabled, the Video RAM will be cached resulting to better performance.

  • Page 41: Integrated Peripherals

    Integrated Peripherals These options display items that define the operation of peripheral components on the system’s input/output ports. Phoenix-AwardBIOS CMOS Setup Utility Integrated Peripherals Item Help OnChip IDE Device [Press Enter] Onboard Device [Press Enter] SuperIO Device [Press Enter] Menu Level : Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help...
  • Page 42 IDE Primary/Secondary Master/Slave PIO (Auto) Each IDE channel supports a master device and a slave device. These four items let you assign the kind of PIO (Programmed Input/Output) was used by the IDE devices. Choose Auto to let the system auto detect which PIO mode is best, or select a PIO mode from 0-4. IDE Primary/Secondary Master/Slave UDMA (Auto) Each IDE channel supports a master device and a slave device.
  • Page 43 USB Keyboard Support (Enabled) This item allows the BIOS to interact with a USB keyboard or mouse to work with MS-DOS based utilities and non-Windows modes. USB Mouse Support (Enabled) Enable this item if you plan to use a mouse connected through the USB port in a legacy operating system (such as DOS) that does not support Plug and Play.
  • Page 44 Onboard FDC Controller (Enabled) Select Enabled if your system has a floppy disk controller (FDC) installed on the system board and you wish to use it. If you install an add-in FDC or the system has no floppy drive, select Disabled in this field. Onboard Serial Port1 (3F8/IRQ4) This option is used to assign the I/O address and interrupt request (IRQ) for onboard serial port1 (COM1).

  • Page 45: Power Management Setup

    Power Management Setup This option lets you control system power management. The system has various power- saving modes including powering down the hard disk, turning off the video, suspending to RAM, and software power down that allows the system to be automatically resumed by certain events.
  • Page 46 Suspend Type (Stop Grant) If this item is set to the default Stop Grant, the CPU will go into Idle Mode during power saving mode. MODEM Use IRQ (AUTO) If you want an incoming call on a modem to automatically resume the system from a power-saving mode, use this item to specify the interrupt request line (IRQ) that is used by the modem.

  • Page 47: Pnp/Pci Configurations

    PNP/PCI Configurations This section describes configuring the PCI bus system. PCI (Peripheral Component Inter- connect) is a system, which allows I/O devices to operate at speeds nearing CPU’s when they communicate with own special components. All the options describes in this section are important and technical and it is strongly recommended that only experienced users should make any changes to the default settings.

  • Page 48: Pc Health Status

    PC Health Status On motherboards that support hardware monitoring, this item lets you monitor the param- eters for critical voltages, critical temperatures, and fan speeds. Phoenix-AwardBIOS CMOS Setup Utility PC Health Status Item Help Target Temperature [Disabled] Shutdown Temperature [Disabled] Case Open Warning [Disabled] Case has been:...

  • Page 49: Frequency/Voltage Control

    Frequency Control This item enables you to set the clock speed and system bus for your system. The clock speed and system bus are determined by the kind of processor you have installed in your system. Phoenix-AwardBIOS CMOS Setup Utility Frequency Control Item Help CPU Clock Ratio...

  • Page 50: Load Performance Defaults

    Load Performance Defaults This option opens a dialog box that lets you install performance defaults for all appropriate items in the Setup Utility: Press <Y> and then <Enter> to install the defaults. Press <N> and then <Enter> to not install the defaults. The performance defaults place no great demands on the system and are generally stable.

  • Page 51: Save & Exit Setup Option

    Save & Exit Setup Option Highlight this item and press <Enter> to save the changes that you have made in the Setup Utility and exit the Setup Utility. When the Save and Exit dialog box appears, press <Y> to save and exit, or press <N> to return to the main menu: Exit Without Saving Highlight this item and press <Enter>...
  • Page 52 Memo Using BIOS...

  • Page 53: Using The Motherboard Software

    Chapter 4 Using the Motherboard Software About the Software CD-ROM The support software CD-ROM that is included in the motherboard package contains all the drivers and utility programs needed to properly run the bundled products. Below you can find a brief description of each software program, and the location for your motherboard version.

  • Page 54: Running Setup

    Setup Tab Setup Click the Setup button to run the software installation program. Select from the menu which software you want to install. Browse CD The Browse CD button is the standard Windows command that allows you to open Windows Explorer and show the contents of the support Before installing the software from Windows Explorer, look for a file named README.TXT, INSTALL.TXT or something similar.
  • Page 55 Click Next. The following screen appears: Check the box next to the items you want to install. The default options are recommended. Click Next run the Installation Wizard. An item installation screen appears: Follow the instructions on the screen to install the items. Drivers and software are automatically installed in sequence.

  • Page 56: Manual Installation

    Manual Installation Insert the CD in the CD-ROM drive and locate the PATH.DOC file in the root directory. This file contains the information needed to locate the drivers for your motherboard. Look for the chipset and motherboard model; then browse to the directory and path to begin installing the drivers.
  • Page 57 Caractéristiques Processeur Cette carte mère utilise un type LGA775 de Pentium 4/Celeron D/Pentium D présentant les fonctionnalités suivantes : • Reçoit des processeurs Intel Pentium 4/Celeron D/Pentium D • Support un bus système (FSB) de 800/533 MHz • Supporte le CPU de technologie “Hyper-Threading” La technologie “Hyper-Threading”...
  • Page 58 LAN sur carte (optionnel) Cette carte mère prend en charge les chipsets LAN suivants : • Supporte le fonctionnement en Auto-négociation N-way en 10/100 Mb/s • Prend en charge la capacite half/full duplex • Supporte la fonction Wake-On-LAN (WOL) -réveil par appel réseau et le réveil à...
  • Page 59 Feature Prozessor Das Motherboard verwendet einen LGA775 Typ Pentium 4/Celeron D/Pentium D mit den folgenden Eigenschaften: • Nimmt Intel Pentium 4/Celeron D/Pentium D Prozessoren auf • Unterstützt einen Systembus (FSB) mit 800/533 MHz • Unterstützt CPU mit “Hyper-Threading”-Technologie “Hyper-Threading”-Technologie läßt das Betriebssystem glauben, es sei an zwei Prozessoren angeschlossen, was zwei parallele Threads auf separaten ‘logischen’...
  • Page 60 Onboard LAN (Optional) Dieses Motherboard kann einen der folgenden LAN-Chipsätze unterstützen: • Unterstützt 10/100 Mb/Sek N-way Auto-negotiation Betrieb • Unterstützt Halb-/Vollduplex • Unterstützt Wake-On-LAN (WOL) Funktion und Remote Wake-up • Enthält 1000/100/10 Transceiver • Unterstützung von PCI v2.3, 32-Bit, 33/66-MHz •...
  • Page 61 Caratteristiche Processore La scheda madre utilizza un tipo LGA775 di Pentium 4/Celeron D/Pentium D che offre le seguenti caratteristiche: • Alloggia processori Intel Pentium 4/Celeron D/Pentium D • Supporta un bus di sistema (FSB) fino a 800/533 Mhz • Supporta CPU con tecnologia “Hyper-Threading” La tecnologia “Hyper-Threading”...
  • Page 62 LAN Onboard (opzionale) La funzionalità LAN integrata sulla scheda offre le seguenti caratteristiche: • Supporta operazioni di auto-negoziazione N-way a 10/100 Mb/s • Supporto di funzionalità half/full duplex • Supporto funzione WOL (Wake-On-LAN) e wake up remoto • Transceiver 1000/100/10 integrato •...
  • Page 63 Características Procesador Esta placa principal usa un tipo LGA775 de Pentium 4/Celeron D/Pentium D que lleva las sigtes. características: • Acomoda procesadores Intel Pentium 4/Celeron D/Pentium D • Soporta un sistema de bus (FSB) de 800/533 MHz • Soporta CPU de tecnología “Hyper-Threading” La tecnología “Hyper-Threading”...
  • Page 64 LAN abordo(optativo) Esta placa principal puede soportar uno de los sigtes. chipset LAN: • Soporta la operación de auto-negociación de 10/100 Mb/s N-way • Soporta capacidad duplex medio/completo • Soporta la función Wake-On-LAN (WOL) y despertar remoto • Transceptor 1000/100/10 integrado •...
  • Page 65 Características Procesador Esta motherboard usa um tipo de Pentium 4/Celeron D/Pentium D LGA775 que possui as seguintes características: • Acomoda processadores Intel Pentium 4/Celeron D/Pentium D • Suporta um bus sistema (FSB) de 800/533 MHz • Suporta CPU de tecnologia “Hyper-Threading” A tecnologia “Hyper-Threading”...
  • Page 66 LAN incorporada (Opcional) Esta motherboard poderá suportar qualquer um dos seguintes conjuntos de chips LAN: • Suporta o funcionamento de negociação automática de 10/100 Mb/s N- direcções • Suporta capacidade de duplex pela metade/ou na totalidade • Suporta a função Wake-On-LAN(WOL) e despertar remoto •...
  • Page 67 機能 プロセッサ このマザーボードには LGA775 タイプのPentium 4/Celeron D/Pentium D を取り付 け可能で、次の特徴があります： • Intel Pentium 4/Celeron D/Pentium D プロセッサに対応 • 800/533 MHzのシステムバス(FSB)をサポート • “ハイパースレッド” 技術をサポート ハイパースレッド（HT） 技術というのは、オペレーションシステムに2つのプロセッサが存在すると認識さ せることで、実際には2つのスレッドを1つのプロセッサで同時に執行させ、平行利用を可能とする技術 です。 チップセット 搭載した848P Northbridgeおよび ICH5 Southbridgeチップセットは最新且つ拡張性あるア ーキテクチャを採用し、高い安定性およびパフォーマンスを兼ね備えたものです。 848P (NB) • ICH5に266MB／秒のポイント対ポイントの接続を可能にするHI (Hub Interface) 1.5 に対応 •...
  • Page 68 オンボードLAN (オプション) 当マザーボードは次のLANチップセットのいずれかを搭載しております： • 10/100 Mb/秒のNウェイ自動認識機能動作をサポート • 半/全二重動作可能 • Wake-On-LAN (WOL) 機能とリモートwake-up機能 • 1000/100/10 トランシーバーを搭載済み • PCI v2.3, 32-bit, 33/66-MHzへの対応 • IEEE 802.3、IEEE802.3u およびIEEE802.3abに完全対応 拡張オプション このメインボードには次の拡張オプションがあります: • 8X/4Xモード対応のAGP3.0仕様スロット(1.5VAGPインターフェースのみに対応 )が1つ。 • 32ビットPCIスロットが5つ • 40ピンIDEロープロフィルヘッダー(4つのIDEチャネルをサポート)が2つ • フロッピーディスクインターフェースが1つ • 7ピンSATAコネクタが2つ このマザーボードは、100/66 MB/秒の転送速度でのUltra DMAバスマスタリングをサ ポートします。...
  • Page 69 기능 프로세서 본 마더보드는 팬티엄 4/Celeron D/팬티엄 D 의 LGA775 을 사용하며 다음과 같은 특 성을 지닙니다: • Intel 팬티엄 4/Celeron D/팬티엄 D 프로세서 사용 • 800/533 MHz시스템 버스(FSB) 지원 • ” Hyper-Threading ”기술 CPU 지원 ”Hyper-Threading”기술은 운영체제를 두 개의 프로세서에 연결한 것처럼 두개의 트래드를...
  • Page 70 보드 내장 LAN (선택 사항) 본 마더보드는 다음과 같은 LAN 칩셋을 지원합니다: • 10/100 Mb/s 자동 조정 오퍼레이션 지원 • Half/Full 듀플렉스 지원 • Wake-On-LAN (WOL) 기능 및 원격 wake-up 지원 • 통합 1000/100/10 트랜시버 • PCI v2.3, 32-bit, 33/66-MHz 지원 •...
  • Page 71 規格 處理器 本主機板適用於LGA775 型Pentium 4 /Celeron D/Pentium D且具有如下功能： • 支援Intel Pentium 4 /Celeron D/Pentium D處理器 • 支援高達800/533 MHz之系統匯流排(FSB) • 支援使用"超執行緒(Hyper-Threading)"技術之CPU 利用“超執行緒(HT)＂技術，可使作業系統在相當於裝上了兩具處理器的狀態下運 作：利用一個＂實體＂處理器模擬出兩個獨立的＂邏輯＂處理器，同時執行兩個工作 緒。 晶片組 848P北橋(NB)及ICH5(SB)南橋晶片組，採用了獨創且具有擴充功能的架構，能夠發揮最 佳的穩定性及功能。 848P (NB) • 支援Hub Interface (HI) 1.5，提供對ICH5高達266 MB/秒的點對點 連接 • 支援 具有8X/4X AGP 資料傳輸及8X/4X 快寫功能的AGP 3.0 •...
  • Page 72 機載LAN(選購) 本主機板搭載有如下其中一種LAN晶片組： • 支援 10/100 Mb/秒N向自動辨識連線功能 • 支援半及全雙工 • 支援Wake-On-LAN (WOL)功能及遠端wake-up功能 • 整合有1000/100/10 收發器 • 支援PCI v2.3, 32位元, 33/66-MHz • 完全支援IEEE 802.3、 IEEE802.3u 及IEEE802.3ab 擴充選項 主機板機載有下列擴充選項功能: • 1個支援8X/4X 模式的AGP 3.0相容插槽(僅支援1.5伏特電壓規格介面) • 5個32位元PCI插槽 • 2個40針IDE低通接頭(支援4個IDE通路) • 1個軟體機介面 • 2個7針SATA插頭 本主機板支援傳輸率100/66 MB/秒下的Ultra DMA 匯流排主控功能。 整合的輸入出功能...
  • Page 73 功能 处理器 此主板使用 LGA775 型 Pentium 4/Celeron D/Pentium D CPU，具备以下特点： • 支持 Intel Pentium 4/Celeron D/Pentium D 处理器 • 支持 800/533 MHz 系统总线 (FSB) • 支持“多线程”技术 CPU “多线程”技术可以让操作系统认为自己连接了两个处理器，允许两个线程并行运行 ，每个线程位于同一处理器中的单独“逻辑”处理器中。 芯片组 848P北桥 (NB) 和 ICH5 南桥 (SB) 芯片组是基于一种新型的、可扩展的架构，能提 供已经证明的可靠性和高性能。 848P (NB) •...
  • Page 74 Onboard LAN (可选) 此主板支持以下任何一种 LAN 芯片组： • 支持 10/100 Mb/s N 路自协商工作 • 支持半双工和全双工工作 • 支持 LAN 唤醒 (WOL) 功能和远程唤醒功能 • 集成 1000/100/10 收发器 • 支持 PCI v2.3，32-位，33/66-MHz • 完全支持 IEEE 802.3，IEEE 802.3u和IEEE 802.3ab 扩展选项 此主板提供如下扩展选项： • 1 个 8X/4X AGP 3.0 插槽(只支持 1.5V AGP 接口) •...
  • Page 75 Характеристики Процессор Плата построена на базе процессора Pentium 4/Celeron D/Pentium D LGA775 и обладает следующими характеристиками: • Обслуживает процессоры Intel Pentium 4/Celeron D/Pentium D • Поддерживает системные шины (FSB) с частотой 800/533MHz • Поддерживает технологию CPU “Hyper-Threading” Технология “Hyper-Threading” «убеждает» операционную систему в том, что в машине имеется...
  • Page 76 Встроенный сетевой адаптер LAN (опционально) Встроенный сетевой адаптер LAN обладает следующими характеристиками: • Поддерживает автоматическое определение скорости и режима соединения 10/100Mb/s • Поддерживает режимы Half/Full duplex • Поддерживает функции Wake-On-LAN(WOL) и remote wake-up • Интегрированный трансивер 1000/100/10 • Поддеркжа PCI v2.3, 32-бит, 33/66-MГц •...
  • Page 77 Cechy Procesor Ta płyta główna zaopatrzona jest w procesor Pentium 4/Celeron D/Pentium D typu LGA775 i charakteryzuje się następującymi cechami: • Przystosowana do obsługi procesorów Intel Pentium 4/Celeron D/Pentium D • Obsługuje szynę systemowa (FSB) 800/533MHz • Zabezpiecza technologię CPU “Hyper-Threading” Technologia “Hyper-Threading”...
  • Page 78 Zintegrowana obsługa sieci LAN (opcjonalnie) Zintegrowana obsługa sieci LAN posiada następujące właściwości: • Obsluguje N-drożne automatycznie ustalane operacje z szybkościami 10/100 Mb/s • Zdolność Half/Full duplex • Obsługuje funkcję Wake-On-LAN i zdalnie sterowane wake-up (uruchamianie komputera) • Zintegrowany terminal nadawczo-odbiórczy 1000/100/10 •...
  • Page 79 Vlastnosti Procesor Tato základní deska je určena pro procesory Pentium 4 /Celeron D/Pentium D LGA775 a může nabídnout následující vlastnosti: • Použití pro procesory Intel Pentium 4/Celeron D/Pentium D • Podporuje taktování systémové sběrnice (FSB) na frekvenci 800/533 MHz • Podporuje technologii CPU „Hyper-Threading“...
  • Page 80 Vestavění síťové rozhraní LAN (volitelně) Vestavěné síťové rozhraní LAN nabízí následující možnosti: • Podpora 10/100 Mb/s N–cestného automatického přepínání provozu • Možnost polovičního a plného duplexu • Podpora funkce Wake–On–LAN(WOL) a aktivace na dálku • Integrovaný transceiver 1000/100/10 • Podpora rozhraní PCI v2.3, 32bitové, 33/66 MHz •...
  • Page 81 Caracteristici Procesorul Această placă de bază utilizează Pentium 4/Celeron D/Pentium D de tipul LGA775, având următoarele caracteristici: • Funcţionează cu procesoare Intel Pentium 4/Celeron D/Pentium D • Funcţionează cu bus sistem (FSB) de 800/533 MHz • Este compatibilă cu unităţi centrale dotate cu tehnologia „Hyper- Threading”...
  • Page 82 Onboard LAN (opţional) Onboard LAN are următoarele caracteristici: • Suportă operaţii de autonegociere N-way de 10/100 Mb/s • Posibilitate de semi-duplex sau duplex total • Suportă funcţia Wake-On-LAN şi trezirea de la distanţă • Unitate de emisie/recepţie 1000/100/10 integrat • Suportă...
  • Page 83 Спецификация Процесор Тази дънна платка използва Pentium 4/Celeron D/Pentium D тип LGA775 със следните спецификации: • поддръжка на процесори Intel Pentium 4/Celeron D/Pentium D • поддръжка на системна шина със скорост 800/533MHz • поддръжка на процесори с технология “Hyper-Threading" Технологията “Hyper-Threading" позволява да се “излъже” операционната система, че работи...
  • Page 84 Интегриран мрежов контролер (опция) Спецификация на интегрирания мрежов контролер: • Поддръжка на режими: 10/100 Mb/s с функция за определяне оптималната скорост на трансфер (N-Way Auto-negotiation). • Half/Full duplex • поддръжка на функция за “събуждане” Wake-On-LAN и дистанционен wake-up • Интегриран 1000/100/10 контролер •...
  • Page 85 Jellemző Processzor Ez az alaplap LGA775 típusú Pentium 4/Celeron D/Pentium D számára készült, és a következő jellemzőkkel bír: • Intel Pentium 4/Celeron D/Pentium D processzorokkal működik • 800/533 MHz sebességű rendszerbuszt (FSB) támogat • Támogatja a „Hyper-Threading” technológiát használó központi egységeket A „Hyper-Threading”...
  • Page 86 Alaplapon levő LAN (választható) Az alaplapon levő LAN jellemzői: • 10/100 Mb/s N-Way automatikus beállítással • Teljes/fél duplex lehetőség • Támogatja a Wake-On-LAN (WOL) funkciót és a távoli ébresztést • Integrált 1000/100/10 adó-vevő • Támogatja a 32 bites, 33/66 MHz-es PCI 2.3-as változatát •...

Table of Contents