Power Switch; Installing; Power Supply - Zte WF832 User Manual

2.3.3 Power Switch

ZTE WF832 may be turned on by switch
side of the FWT. Turn it to "∣" to power on, turn it to "О" to
power off.

2.4 Installing

To install ZTE WF832, please:
1. Connect a telephone to the PHONE interface.
2. Install the antenna to the antenna connector. Hold the
stick of the antenna and rotate the screw cap in clockwise
direction. Do not rotate antenna directly.
3. Connect the terminal to outer power supply using the
external power adapter.
4. Turn the power switch
terminal will get started. Make sure that the phone is on hook
before powering on.
5. If you want to power off the terminal: Turn the
switch to "О".
Note: The prompt of shut down will not be heard while the
terminal is power off when a new call comes in.

2.5 Power Supply

There are two ways of power supply:
1. External power supply
2. Spare rechargeable battery supply
at the rear
to "∣", and then the
11