Table of Contents
Advertisement
3 Basic Operations
3.1 Making a Call
3.1.1 Making a Domestic Call
Make sure that ZTE WF832 and telephone connected
properly. Off hook the handset of the telephone, and then type
telephone number (add area code when making a long
distance call) on the keypad of the telephone, the terminal
will send it automatically within 4 seconds.
Note: when RSSI light turns off and there is no dialing tone
when picking up telephone's handset, it indicates weak RF
signal or loosen antenna screw. Change the position of the
terminal or check the antenna installation.
3.1.2 Making an International Call
Type the country code, the area code and the desired
number; the terminal will send it automatically within 4
seconds. Delete the initial "0" from the area code when you
make a call.
Country code + Area code + Telephone number
3.1.3 Adjusting Volume during a Call
During conversation, you can press "*" key to decrease
13
Advertisement
Table of Contents
