MV Agusta F4 312 User Manual page 116

4
OPERATION
J Lap Time Displaying
At the end of the lap time recording, it is possible to
display the stored data.
NOTE
Make sure not to shut off the engine. This would
cause the loss of all the stored data.
Press the SET button for a time longer than 0.25 sec
4
and less than 2 sec.
NOTE
Pressing the SET button for longer than 2 seconds
would cause the loss of all the stored data.
The "LAP 01" writing is displayed; after one second,
the display shows the time corresponding to the first
recorded lap.
- 47 -