7. Enter a second target application rate (in U.S. gallons
per acre, liters per hectare, or U.S. gallons per 1,000
sq. ft.) that you want to spray, if you desire.
Note: Rate 2 should not differ more than 20%
from Rate 1 unless there is a change in nozzle size.
If you do not use a second rate, enter the same rate
for Rate 1 and Rate 2.
8. Press the [Enter] key.
Note: You have now completed programming
the console computer. The flashing CAL in the
display should stop. If not, repeat the procedures for
programming the console computer.
10